User manual AEG-ELECTROLUX DB 1384

[. . . ] 4 First use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Set the water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Use of dishwasher salt . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Use of rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals. 1 2 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will be used during the prewash phase. When using detergent tablets; place the tablet in compartment (1) Multi-tab function This appliance is equipped with the "Multitab function", that allows the use of the "Multitab" combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc. . . ). Check whether these detergents are suitable for your water hardness. Once this function is selected it will remain active for all following wash programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. 14 electrolux When using the "Multitab function", the cycle durations may change. If this is the case, the running time for the programme is automatically updated on the digital display. Activate/deactivate the ''Multitab function'' before the start of a washing programme. Press the button corresponding to the required programme (refer to 'Washing programmes' chart). Close the dishwasher door, the programme starts automatically. Programme progress display gradually shows the progress of the washing programme. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until electrolux 15 the flashing number of hours for the delay start show in the digital display. The delay start indicator light comes on. The start of the selected washing programme can be delayed for between 1 and 19 hours. Close the dishwasher door, the countdown starts automatically. Only the first LED lamp of the programme progress display remains on during the countdown of the delay start. The countdown will decrease with steps of 1 hour. The opening of the door will interrupt the countdown. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the drain hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. [. . . ]