User manual AEG-ELECTROLUX ECN28108W

[. . . ] The symbols below help you to find things more easily: Safety precautions Warnings and information at this symbol serve safety for you and your appliance. Hints, useful information Environmental information 3 SAFETY INSTRUCTIONS WARNINGS AND GUIDELINES These warnings are provided to improve safety, and should be read carefully before installing or using your freezer. IMPORTANT It is vital that these instructions are kept with the freezer for future use. If the freezer is sold or given to another user, or if you move and leave the freezer behind, you must ensure that the instructions accompany the freezer to enable the next user to use the freezer correctly and read the relevant warnings. [. . . ] Movement over open position of top (about 95°) can cause damage. INSTALLATION POSITION (1) Place the freezer horizontally on a firm surface, resting on all four plastic feet. Use a wooden block or similar object to compensate for any bumps/holes in the surface. The room should be dry and adequately ventilated. Temperatures of the external environment have an impact on the energy consumption of the device. Therefore: -do not put the device to a place exposed to sunshine ore besides a radiator or oven, -put it to a place where the temperature of the environment corresponds to the climatic classification for which the device was designed. Climatic classification Ambient temperature limits SN from +10°C to +32°C N from +16°C to +32°C ST from +18°C to +38°C T from +18°C to +43°C If the freezer has been handled standing on end it should be allowed to stand in normal position for about 12 hours before switching it on. Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown. TEMPERATURE INDICATOR (4) REGULATOR AND SWITCHING ON FREEZER BOX (2) Close top of freezer box installed in accordance with specifications down then connect equipment with mains as specified above. At this time electric components inside will be energised. Adjust knob of temperature regulator in centre with rotating clockwise. After a weak clicking cooling compressor will start together with slight vibration and noise. After operation of several hours red lamp goes out, it indicates that correct temperature has been created in the freezing room and equipment is ready for storage of deep frozen goods. Do not buy products which have wet or damaged packaging. Place purchased products in your freezer as quickly as possible. We recommend using an insulated bag to bring such products home with you. Never place bottles, warm objects, or fizzy drinks in the freezer. FREEZING Only use fresh food of the best quality. Cool hot dishes to room temperature as quickly as possible before placing them in the freezer. Wrap food carefully in freezer foil, or use the special freezer boxes or bags which are on the market. Divide food into small portions before freezing - this ensures that freezing is more rapid, and means that you only need to defrost the amount needed for immediate consumption. Remember that defrosted food must not be re-frozen. However, dishes which have Never use a knife or any other sharp implement to remove frost. When the frost or ice layer is 10-15 mm thick, the freezer should be defrosted. We suggest that you defrost your freezer when there is little or no food inside. [. . . ] Products of Electrolux manufacture which are NOT marketed by Electrolux Ltd. EEC Countries - the standard guarantee is applicable but is subject to the owner's responsibility and cost to ensure the appliance meets the standards set by the country to which the product is taken. The Electrolux Company in the contry concerned will be pleased to advise further. Sight of your purchase receipt will be required by them. SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Electrolux Service Force Centre by telephoning: read the details under the heading 'Something Not Working?'. [. . . ]