User manual AEG-ELECTROLUX EFC60500K

[. . . ] When used as an extractor unit, the hood must be fitted with a hose having preferably the same diameter as the outlet hole. Sion or have been trained in the use of the appliance by a person responsible for their safety. This appliance is designed to be operated by adults, children should be monitored to ensure that they do not play with the appliance. this appliance is designed to be operated by adults. [. . . ] Pressing the button (while the hood is on) modifies the motor speed: Speed 1: the number "1" appears on the display 1 Speed 2: the number "2" appears on the display 2 Speed 3: the number "3" appears on the display 3 High-speed: the number "4" appears (flashing) on the display The high-speed function is regulated by a timer. The standard time setting is 5', at the end of which the hood adjusts to speed 2. Press button 2 to deactivate this function before the set time expires; the hood will adjust to speed 1. Speed timer button 4 Press button "4" to activate the speed timer; the hood turns off once the set time expires. the timer functions in the following way: · Speed 1 - 20 minutes (the number 1 "1" and a small flashing LED light appear on the display) · Speed 2 - 15 minutes (the number 2 "2" and a small flashing LED light appear on the display) · Speed 3 - 10 minutes (the number 3 "3" and a small flashing LED light appear on the display) · High-speed - 5 minutes (the number 4 "4" and a small flashing LED light appear on the display) Press button 1 or button 4 to turn the hood off while the speed timer is in function; by pressing button 2, the hood returns to the set speed. Grease filter indicator Grease After 80 hours of operation, the 1 number "1" starts flashing on the display. press and hold button 1 or 3 to reset the indicator. Carry out maintenance on the grease filter according to the indications of this manual. Charcoal filter indicator After 320 hours of operation, the number "2" starts flashing on the display. press and hold button 1 or 3 to reset the indicator. Carry out maintenance on the charcoal filter according to the indications of this manual. When both filter signals appear simultaneously, numbers "1" and "2" will alternately flash on the display. reset the indicator by performing the above-mentioned procedure twice. The first operation resets the grease filter indicator, while the second operation resets the charcoal filter indicator. the charcoal filter indicator is not active in the standard mode. If the hood is used in the recirculation mode, the charcoal filter indicator must be activated. Perform the following steps to activate the charcoal filter indicator: charcoal Turn the hood off and keep buttons 2 and 3 pressed for 3". The numbers "1" and "2" will flash for 2" once the function has been activated. Charcoal filter indicator deactivation: Turn the hood off and keep buttons 1 and 2 pressed for 3". Before performing any maintenance operation, isolate the hood from the off removing electrical supply by switching off at the connector and removing the connector fuse. Through Or if the appliance has been connected through a plug and socket, then the removed from plug must be removed from the socket. grease Metal grease filter · The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal re-circulation function. [. . . ] Remove and keep the 2 screws located in front of the flue opening. Turn the electronic box to face upwards. Fix the box to the motor unit using the 2 screws that were previously removed. Insert the power supply cable into the electronic box and carry out the electrical connection. [. . . ]