User manual AEG-ELECTROLUX EHJ36000U

[. . . ] user manual Induction Teppan Yaki EHJ36000 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description of the Appliance . . . . . . . . . . . . . . . . . . 4 Operating the appliance . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] These noises are not a fault in the appliance and do not affect how it works in any way. You can set the cooking surface to the temperature you want in 10 steps in the range 50 C to 220 C. 4 minutes. Switching the appliance on and off Control panel To switch on To switch off touch for 2 seconds touch for 2 seconds Display / / none Pilot light lights up goes out 3 After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off. Setting the temperature Control panel To increase To decrease To switch off Touch Touch Touch and the same time Display 50 to 220 220 to 50 0 3 If a temperature is selected, the indica- tor flashes until the desired temperature is reached. When the selected temperature is reached, a signal sounds. The indicator stops flashing and displays the selected temperature 8 electrolux Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step 1. (Do not set a heat setting. ) Touch for 4 seconds Display/Signal Appliance switches off. The child safety device is switched on Deactivate the child safety device Step 1. Control panel Switch appliance on Touch for 4 seconds Display/Signal 0 lights up Appliance switches off. The child safety device is switched off. Overriding the child safety device The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards. Touch and Control panel Switch appliance on of a grill zone the same time / Acoustic alarm Display/Signal Until the next time the appliance is switched off, it can used as normal. Using the timer Two functions are possible: Function Automatic cut-out Pre-requisite With heat setting set Result after time has elapsed Acoustic signal 0 lights up Cooking zone switches off Acoustic signal 0 lights up Countdown timer Cooking zones are not switched on 3 If a heat setting is set in addition to a countdown timer that is set, the countdown timer becomes a safety cut-out. The cooking zone is switched off after the time set has elapsed. electrolux 9 Setting the time Step 1. Control panel Touch Touch or Display Pilot light flashes 0 to 99 minutes The pilot light lights up. Control panel Touch Touch Display Pilot light flashes The remaining time counts down to 0. The pilot light goes out. Control panel Touch Touch or Display Pilot light flashes 01 to 99 minutes The pilot light lights up. Switching off the acoustic signal Step 1. Control panel field Touch Acoustic signal Acoustic signal to acknowledge. Acoustic signal stops. Automatic cut-out If a temperature is not set within approx. 10 seconds of the appliance being switched on, the appliance automatically switches itself off. If both grill zones are switched off, the Teppan Yaki automatically switches itself off after approx. If one of the grill zones is not switched off after 90 minutes or if the temperature is not modified, the grill zone automatically switches itself off. Before being used again, this grill zone must be set to 0. 10 electrolux Tips for cooking with the Teppan Yaki Using fats and oils When fats and oils are used, the correct temperature is extremely important. With the correct temperature setting, the valuable Fats / Oils Butter Pork fat Beef fat Olive oil Sunflower oil Groundnut oil Coconut oil components of the oils and fats are retained for a long time. [. . . ] 3 Only use special heat-resistant silicon. Cut-out section Distance from the wall: at least 50 mm Depth:490 mm Width: The widths of all appliances to be built-in are added together, minus 20 mm (see also "Overview of all appliance widths") Example: Installing more than one appliance 1. Work out the size of the cut-out section and saw it out. Remove Frontline strip from the appliances by hand (magnetic fastening). 3. 4. 5. Lay the appliances one at a time on something soft (for example a blanket) with the underside facing upwards. [. . . ]