User manual AEG-ELECTROLUX EHM6532IOW

[. . . ] Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. You've chosen a product that brings with it decades of professional experience and innovation. [. . . ] You do not set the heat setting after you activate the appliance. ⷠYou spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. Before you use the appliance again, wait for the cooking zone to cool down. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. ⷠYou do not deactivate a cooking zone or change the heat setting. After some time comes on and the appliance deactivates. The relation between heat setting and times of the Automatic Switch Off function: · -- 5 hours -- 4 hours -- 1. You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the diagram), and then decreases to the necessary heat setting. Immediately touch the necessary heat comes on setting. The Power function can be activated for a limited period of time ( see Technical information chapter). After that, the induction cooking zone automatically sets back to , highest heat setting. Touch the control bar at the heat setting. change to the left or the right , if it is necessary. Do not release before you have a correct heat setting. Power function of the inner ring starts when the appliance senses the cookware with a smaller diameter than the inner ring. Power function of the outer ring starts when the appliance senses the cookware with a larger diameter than the inner ring. The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the power to the maximum level for one cooking zone in the pair. The power in the second cooking zone automatically decreases. The heat setting display for the reduced zone changes between two levels. To deactivate you can also touch and at the same time. [. . . ] The difference in the operation time depends on the heat setting level and the length of the cooking operation. If you can hear · Crack noise: cookware is made of different materials (Sandwich construction). ⷠWhistle sound: you use one or more cooking zones with high power levels and the cookware is made of different materials (Sandwich construction). ⷠHumming: you use high power levels. [. . . ]