User manual AEG-ELECTROLUX ESF6129

[. . . ] Before any work is carried out on the dishwasher, it must be isolated from the electrical supply, by unplugging the power cord or removing the fuse. Water connection shall be made via an easily accessible stopcock. The power cord must be plugged into an earthed socket, which need to be easily accessible. Permanent installation must only be carried out by an authorised electrician. [. . . ] The programme must be deselected: press and hold the programme selection/cancel button for approx. The programme lamp goes out and the indicator for the ended programme cycle flashes indicating that the programme has been cancelled. -5- Loading the dishwasher How to load the dishes The illustration shows the dishwasher loaded with 5 place settings. Your own dishes are not likely to be identical to this load, but if you follow the advices below we are sure you will be pleased with the result. G G Always place glasses, cups and bowls upside down. Incline deep dishes (soup plates etc. ) so that the water can run off when drying. Make sure that the dishes do not rest against each other. This is particularly important in regard to the cutlery basket - nested spoons, etc. The water must get at all the soiled surfaces. Make sure that cutlery with slender handles and other items do not protrude through the openings in the basket and prevent the spray arm from rotating. Never put silver and stainless steel objects together. When these metals come into contact with each other a chemical reaction occurs which stains the silver. China with a pattern applied on top of the glaze may not be suitable for machine washing as the colours may fade and lose their lustre. Be careful if you open the door immediately after the programme is finished, since hot steam may escape. Cleaning the dishwasher Clean the outside surfaces of the appliance using a mild (non-abrasive) household cleaning product. Finish by removing remaining traces of the product with a damp cloth. Do not use cleaning products which contain alcohol (spirits), thinners and similar substances. Interrupting the programme temporarily 1. Close the door and the programme continues after about 6 seconds. Open the door carefully when the dishwasher is running, since hot steam may escape. Cancelling the programme 1. Press and hold the programme selection/cancel button for approx. The indicator for the ended programme cycle flashes. Were the dishes packed too close together?Did you select a programme with too low temperature?Is the rinse aid dispenser empty? Dishes not washed satisfactorily. Visible lime deposits or white film on the dishes. The dishes are not quite dry and are not shiny. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purchase date: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Under what circumstances does the fault occur? - 12 - Installation instructions Any electrical work required to install this appliance, should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance, should be carried out by a qualified plumber or competent person. Technical specifications Capacity: Dimensions: 5 place settings accordance EN 50242 Height Width Depth Net Minimum Maximum Maximum Power supply Fuse Heating element Power rating 460 mm 450 mm 480 mm 17 kg 50 kPa (0, 5 bar) 1000 kPa (10 bar) 65° C 230 V - 50 Hz 10 A 1200 W 1280 W Weight: Water pressures: Water temperature: Electrical data: - 13 - Unpacking Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately. [. . . ]