User manual AEG-ELECTROLUX ESF65010S

[. . . ] user manual Dishwasher ESF65010 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press function button B, the lights of function buttons A and C go off while the light of function button B continues to flash. To activate the rinse aid dispenser, press button B again, the End indicator light comes on, indicating that the rinse aid dispenser has been activated. To memorize the operation, switch off the dishwasher by pressing the On/Off button. To deactivate the rinse aid dispenser again, follow the above instructions until the End indicator light goes off. If you decide to revert back to the use of individual detergents we advise that you: 1. Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Press the button corresponding to the required programme (refer to 'Washing programmes' chart). When a programme has been selected the corresponding light comes on. The digital display shows 3 horizontal bars. The programme in progress indicator light comes on. Close the dishwasher door, the programme starts automatically. The programme in progress indicator light remains on. The digital display shows only 1 horizontal bar and will remain on for all the duration of the washing programme. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the digital display shows the flashing number of hours for the delay start. The start of the selected washing programme can be delayed for between 1 and 9 hours. [. . . ] To a stand pipe provided with venthole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. To avoid water leakage after installation make sure that the water couplings are tight. 22 electrolux Electrical connection Warning! [. . . ]