User manual AEG-ELECTROLUX ESF66060X

[. . . ] user manual Dishwasher ESF 66060 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com CONTENTS Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 2 4 5 6 6 7 8 9 11 12 Select and start a washing program 13 Washing programs 14 Care and cleaning 15 What to do if. . . 16 Technical data 18 Installation 18 Water connection 19 Electrical connection 20 Environment concerns 21 Warranty 21 Subject to change without notice SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. [. . . ] When the washing program operates, you cannot change the program. Refer to 'Cancelling a washing program'. Select and start a washing program with delay start 1. Press the delay start button until the display shows the necessary delay start of the washing program. 14 electrolux 4. The display shows remaining time to the start of the washing program. ­ When the countdown is completed, the washing program starts automatically. With the delay start function set, the Washing indicator light goes off. Once the countdown of the delay start has ended, the washing program will start automatically and the Washing indicator light comes on. If you open the door during the countdown, this will interrupt the countdown. When you close the door again, the countdown continues from the point of interruption. Press and hold at the same time function buttons B and C buttons until all the program lights come on. ­ When you cancel delay start, you also cancel the washing program. Only interrupt or cancel a washing program if necessary. The washing program continues from the point of interruption. Press and hold at the same time function buttons B and C buttons until all the program lights come on. 2. Release the two buttons, the washing program has been cancelled. At this point, you can follow these steps: 1. Fill the detergent dispenser with detergent before you set a new washing program. End of the washing program The washing program is complete when: · The display shows 0. ­ For better drying results, keep the door ajar for some minutes before you remove the dishes. Let the dishes cool down before you remove them from the appliance. Standby mode If you do not switch off the appliance at the end of the washing program, the appliance automatically goes into standby mode. [. . . ] 6. 7. the period stated is 0 months you are not covered by this product warranty) following the date of original purchase of the Appliance; ­ 'you' means the purchaser of the Appliance not having purchased the appliance for re-sale, and 'your' has a corresponding meaning. This warranty only applies to Appliances purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) any non-excludable statutory warranties in Australia or New Zealand. Electrolux warrants that, when dispatched from an Electrolux warehouse, the Appliance is free from defects in materials and workmanship for the Warranty Period. During the Warranty Period Electrolux or its Authorised Service Centre will, at no extra charge if your appliance is readily accessible without special equipment, and subject to these terms and conditions, repair or replace any parts which it considers to be defective. [. . . ]