User manual AEG-ELECTROLUX ESF66730X

[. . . ] user manual Dishwasher ESF66730 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel First use Set the water softener Use of dishwasher salt Use of rinse aid Daily use Load cutlery and dishes Use of detergent Multi-tab function Select and start a washing programme 2 4 5 6 6 7 8 9 10 13 14 15 Subject to change without notice Unloading the dishwasher Washing programmes Care and cleaning What to do if. . . Technical data Hints for test institutes Installation Water connection Electrical connection Environment concerns 16 17 17 19 20 20 21 22 23 24 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Press the button corresponding to the required programme (see ''Washing programmes'' chart). When a programme has been selected the corresponding light comes on. The programme in progress indicator light comes on. Close the dishwasher door, the programme starts automatically. The programme in progress indicator light remains on. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours. Close the dishwasher door, the countdown starts automatically. The number in the display is no longer flashing but fixed with static light. The countdown will decrease with steps of 1 hour. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. Once the delay start has elapsed the programme will start automatically. 16 electrolux With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light comes on. The selection of the washing programme and delay start can occur also with the door closed. [. . . ] This will prevent waste water from the sink running into the machine. To a stand pipe provided with venthole, minimum internal diameter 4 cm. max 85 cm Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. To avoid water leakage after installation make sure that the water couplings are tight. max 400 cm min 40 cm Electrical connection Warning! [. . . ]