User manual AEG-ELECTROLUX ESI67010X

[. . . ] user manual Dishwasher ESI 67010 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel First use Setting the water softener Use of dishwasher salt Use of rinse aid Daily use Loading cutlery and dishes Use of detergent Multitab function Select and start a washing programme 2 3 4 5 6 7 7 8 9 12 13 14 Subject to change without notice Unloading the dishwasher Washing programmes Care and cleaning What to do if. . . Technical data Hints for test institutes Installation Water connection Electrical connection Environment concerns 15 16 17 18 19 19 20 21 22 23 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] If you decide to revert back to the use of individual detergents we advise that you: 1. Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Important!Set the options before the start of a washing programme. When a washing programme operates, no options can be set. If it is necessary to set an option, cancel the washing programme. Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Select a washing programme (see 'Washing programmes' chart). When a programme has been selected the corresponding light comes on. Close the appliance door, the programme starts automatically. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start appear in the digital display. electrolux 15 2. Close the appliance door, the countdown starts automatically. The number in the display is no longer flashing but fixed with static light. The countdown will decrease with steps of 1 hour. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. [. . . ] Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the drain hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. [. . . ]