User manual AEG-ELECTROLUX ESL43020

[. . . ] user manual Dishwasher ESL 43020 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com CONTENTS Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Loading cutlery and dishes 2 4 5 6 6 7 8 9 Select and start a washing programme Washing programmes Care and cleaning What to do if. . . Technical data Environment concerns 10 11 12 12 14 15 Subject to change without notice SAFETY INFORMATION Before the installation and use, read this manual carefully: · For your safety and the safety of your property. · For the correct operation of the appliance. [. . . ] Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. Start the washing programme. SETTING THE WATER SOFTENER The water softener removes minerals and salts from the water supply. These minerals and salts can cause damage to the appliance. Water hardness German degrees (°dH) 51 - 70 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 French degrees (TH°) 91 - 125 76 - 90 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 mmol/l Clarke degrees 64 - 88 53 - 63 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Water hardness adjustment manually electronically 10 9 8 7 6 51) 4 3 9, 1 - 12, 5 7, 6 - 9, 0 6, 5 - 7, 5 5, 1 - 6, 4 4, 0 - 5, 0 3, 3 - 3, 9 2, 6 - 3, 2 1, 9 - 2, 5 2 1) 2 1) 21) 21) 21) 21) 1 1 electrolux 7 Water hardness adjustment mmol/l Clarke degrees 5 - 12 <5 manually electronically 2 12) Water hardness German degrees (°dH) 4 - 10 <4 1) Factory position. 2) Do not use salt at this level. French degrees (TH°) 7 - 18 <7 0, 7 - 1, 8 < 0, 7 1 12) You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2 (refer to the table). 4. 5. 6. Electronic adjustment 1. Make sure that the appliance is in setting mode. Press and hold the programme button until the programme indicator (A) starts 7. to flash and the programme indicator (B) comes on. When the programme indicator (B) goes off and the end indicator starts to flash, press the programme button. The programme indicator (A) continues to flash. The electronic adjustment of the water softener is activated. The end indicator shows the setting of the water softener. The number of flashes of the end indicator is the same as the water hardness level (example: 5 flashes / pause / 5 flashes = level 5). Fill the salt container and the rinse aid dispenser. Adjust the water hardness to the highest level. Start a washing programme without dishes. When the washing programme is completed, adjust the water softener to the water hardness in your area. Adjust the quantity of rinse aid. 1 8 7 6 Use of detergent To help the environment, do not use more than the correct quantity of detergent. Obey the instructions on packaging of the detergent . [. . . ] ­ Serial number (S. N. ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The washing results and drying results are not satisfactory Possible cause The selected washing programme was not applicable for the type of load and soil. Possible solution Make sure that the washing programme is applicable for the type of load and soil. 14 electrolux Problem Possible cause The baskets were not loaded correctly, water did not touch all surfaces. The spray arms could not turn freely because of incorrect arrangement of the load. The filters are dirty or not assembled and installed correctly. [. . . ]