User manual AEG-ELECTROLUX ESL6350LO

[. . . ] ESL6350LO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN DISHWASHER USER MANUAL 2 www. electrolux. com CONTENTS 1. 16 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. [. . . ] Make sure that the set level of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Processing residues can stay in the appliance. Do not use detergent and do not load the baskets. If you use the combi detergent tablets, activate the multitab option. 6. 1 Adjusting the water softener Water hardness German degrees (°dH) 51 - 70 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 <4 French degrees (°fH) 91 - 125 76 - 90 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 7 - 18 <7 mmol/l Clarke degrees 64 - 88 53 - 63 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 <5 Water softener adjustment Manual Electronic 10 9 8 7 6 51) 4 3 2 12) 9. 1 - 12. 5 7. 6 - 9. 0 6. 5 - 7. 5 5. 1 - 6. 4 4. 0 - 5. 0 3. 3 - 3. 9 2. 6 - 3. 2 1. 9 - 2. 5 0. 7 - 1. 8 < 0. 7 2 1) 2 1) 21) 21) 21) 21) 1 1 1 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. ENGLISH 9 Electronic adjustment 1. Press the on/off button to activate the appliance. Press and hold, at the same time, and and to flash. until the , indicators start 5. • indicator continues to The flash. five intermittent acoustic signals = level 5. • The display shows the setting of the = level 5. E. g. indica- Press again and again to change the setting. • The programme is completed. 1 Starting a programme without delay start 1. Press the on/off button to activate the appliance. The indicator of the ECO programme comes on. The display shows the duration of the programme. • If you want to start the ECO programme, close the appliance door. • If you want to set a different programme, press the button of the programme you want to set. The display shows the duration of the programme. The programme duration starts to decrease with steps of 1 minute. Reset function For some settings it is necessary that the appliance is in user mode. To set the appliance in user mode, do the Reset function. Press and hold, at the same time, and until the indicator comes on. Starting a programme with delay start 1. [. . . ] If the display shows other alarm codes, contact the Service. 10. 1 If the washing and drying results are not satisfactory Whitish streaks or bluish layers on glasses and dishes • The released quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • The quantity of detergent is too much. Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not sufficient. [. . . ]