User manual AEG-ELECTROLUX ETN1042H 1KOK

[. . . ] For any other operation make sure the appliance is inactive Warning Water leakage will occur when the discharge tap is open Instructions Read these instructions carefully before using the appliance. · Keep the instructions · Failure to respect these instructions may result in injuries or in damages to the appliance The manufacturer is not liable for damage deriving from failure to respect these instructions Use original or manufacturer recommended accessories and spare parts only. Designated use Warning This is a household appliance only It is not intended to be used in: · Staff kitchen areas in shops · Offices and other working environments electrolux 3 · Farm houses · By clients in hotels, motels, and other residential type of environments · Bed and breakfast type of environments The appliance is designed and made to supply water and ice. This appliance is not suitable for commercial use. [. . . ] Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the appliance, place the grid back in its original position. Electrical connection Warning Before starting the plug-in, make sure voltage and frequency match the related information on the rating plate and on the technical specifications table. Warning Make sure the main switch is in off position Connect the appliance to the socket using the supplied cord. When necessary, extract momentarily the power cord from the safety clip to make the connection to the power socket easier. Fix the supplied cord to the clip on the right side of appliance. 1 230V AC Socket 2 Clip to fix cord 10 electrolux Secure water discharge tap Warning Water leakage will occur when the discharge tap is open Warning Close the water discharge tap if open. A red safety screw prevents the accidental opening of the tap. During regular appliance operation, when not otherwise indicated, the tap shall be closed and the screw inserted. 1 Water inlet 3/4" Filter cartridge first installation Warning Make sure there are no water leaks Warning Dry well the base of the appliance before installing it into the cabinet The head of the filter cartridge is on the left side of the appliance. 1 Water discharge tap 2 Safety screw Water mains connection Warning Provided inlet hose can reach a maximum distance of 4 meters from the water mains. In alternative, extra long tubes need to be used Warning It is necessary to place a tap between the water mains and the water inlet hose Warning Connect only to potable cold water mains Warning All water mains connections must be carried out by a certified plumber Warning Use only the new hose-sets included in the package Warning Do not reuse old hose-sets Screw the hose to water inlet rotating it clockwise, then connect the hose to the water mains. Remove the cap from the filter cartridge, hold the filter head tight and insert the new filter cartridge in the head by pushing it up and rotating it counter-clockwise. 1 Filter head 2 Filter cartridge Pressure reducer first installation Warning Do not open the pressure reducer during unit connection 1 CO tube 2 CO fitting electrolux 11 Pull out the CO-labeled tube and its fitting placed on the left side of the appliance and then insert the fitting in the CO pressure reducer. CO bottle first installation Warning While screwing on the new CO bottle, CO leaks might occur The CO bottle is placed on the left side of the appliance. Press the power icon until power LED starts flashing 6. Remove the safety screw and open the water discharge tap 7. Press the power icon again and keep it pressed until the power LED stops flashing 8. Close the water discharge tap and reinsert the safety screw 9. Restart the appliance using the power switch 1. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the appliance, place the grid back in its original position 2. Remove the safety strip of the CO holder to extract the used bottle 3. Hold the pressure reducer and turn the CO bottle clockwise 4. Screw the new bottle, counterclockwise, into the pressure reducer 5. Secure the new CO bottle to its holder and fix it with the provided safety strip 6. [. . . ] Turn off the appliance using the power switch Water may come out from the filter cartridge, therefore place a cloth on the filter head and cartridge to prevent the cabinet from getting wet. If there is water on the base, dry it carefully. Rotate the filter cartridge clockwise and pull it down to extract it 5. Open the cleaning cartridge and fill it with "Neutral Detergent" 6. [. . . ]