User manual AEG-ELECTROLUX ETN12011V 1HO KM100

[. . . ] Before Using for the first time . . . . . . . . . . . . . . . . . Using the Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 4 8 9 Cleaning and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What to do if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 10 ­ ­ ­ ­ On Off On Off ECAIA207 V03IA003 24 Factory Settings electrolux 19 3 Between 22:00 and 6:00 the display reduces its brightness when the appliance is switched off to save energy. Operation of the Basic Settings Example 1. Using or select the menu option Basic Settings. Using or go to the setting that you want to adjust. The value currently set appears in the display. 3. Confirm with . The function Set+Go is now switched on. To start Set+Go 1. As soon as the oven function is completed, a signal sounds. Press any key to switch off the signal. 2. 3 While the selected oven function with is 5. The setting is changed. Everyday use of Basic Settings Set+Go The function Set+Go means you can set all settings for an oven function and then start it later. Example application: You prepare a dish in the morning and enter all necessary settings in the oven. Your child comes home at lunchtime, puts the dish in the oven, presses any key and the oven starts with your settings. The settings of the oven funtion are displayed with the new cook time. 3 The rest of the procedure is the same as a normal oven function. The Time Extension can be set repeatedly. Press key repeatedly until the "Minute Minder" window appears. Using or key, set the desired countdown (max. 2 hours 30 minutes). 2. Confirm with or wait 5 seconds. The last menu option visited and the remaining time are displayed. When the time has counted down to 10%, a short signal sounds. When the time has elapsed, an acoustic signal sounds for 2 minutes and a message is displayed. Press any key to stop the signal (except ). 3 The Minute Minder remains active if you change to another function or the appliance is switched off. Duration or End Time Duration For setting how long the oven is to operate. End Time For setting when the oven is to switch itself off again. Press key repeatedly until the "Duration/End Time" window appears. [. . . ] 3 To secure at the top, 2 holes with ø 2. 8 mm as stamped can be drilled (Detail C). Electrical connection/cable The electrical connection must be carried out by a licensed installer. A type H05VV-F cable or a higher value must be used as the power supply lead. If there is no neutral wire on the domestic supply side, please order transformer R07 with order number 940 304189 (2-phase). [. . . ]