User manual AEG-ELECTROLUX EW1275F

[. . . ] Tips and information about economical and ecological use of the machine are marked with this symbol. Our contribution to the protection of the environment: we use recycled paper. 27 ENGLISH Contents Warnings Disposal 29-30 30 Maintenance Bodywork Door seal Detergent dispenser drawer Drain filter Water inlet filter Emergency emptying out Frost precautions 48 48 48 48 48 48 49 49 Tips for environmental protection 30 Technical specifications Installation Unpacking Positioning Water inlet Water drainage Electrical connection Building-in Preparation and assembly of the door 31 32 32 32 33 33 33 34 34-35 Something not working? 50-51 Your new washing machine Description of the appliance Detergent dispenser drawer and programme chart 36 36 36 Use Control panel Controls Washing hints Sorting the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives Quantity of detergent to be used International wash code symbols Operating sequence Washing programmes Special programmes 37 37 37-40 41 41 41 41 41 41 41 42 42 43 44-45 46 47 28 Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. [. . . ] When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted. 30 40 30 40 30 40 60 E The selector dial can be turned either clockwise or anticlockwise. Position E corresponds to the ENERGY SAVING programme and position to "cold wash". At the end of the programme the selector dial must be turned to position X (reset). Functions End of programme When the door locked light has gone out, the door can be opened. The light (END) on the programme progress display illuminates. Switch the machine off and remove the laundry. Turn the programme selector dial to X. Programme information Wool Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the "hand washing" care symbol. = Soak Select this programme for heavily soiled laundry. Pour the detergent into the compartment . This programme is not suitable for wool. The machine performs a soak at 30C and stops with the water in the drum. The water can be emptied out by depressing the START/PAUSE button. tea cloths, towels, tablecloths, sheets. . . ) for normally soiled, colour fast garments (e. g. shirts, night dresses, pyjamas. . . . ) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e. g. underwear). (cold)for delicate items (e. g. net curtains), mixed 30-40 laundry including synthetic fibres and woollens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their "whiteness" in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure that no metal objects are left in the laundry (e. g. Button up pillowcases, close zip fasteners, hooks and poppers. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Remove hooks or tie them up in a bag or net. Removing stains Stubborn stains may not be removed by just water and detergent. [. . . ] During machine operation it is possible that the light the following lights start to flash: : problem with the water supply : problem with water draining : door open to restart the programme. If after , the light of the START/PAUSE button and one of Once the problem has been eliminated, press the START/PAUSE button all checks, the problem persists, contact your local Service Force Centre. Problem The machine does not start up: Possible cause The door is not firmly closed. The machine is not plugged in or there is no power at the socket. The programme selector dial is not positioned correctly. [. . . ]