User manual AEG-ELECTROLUX EWB105405W

[. . . ] installation · Unpack or ask for the appliance to be unpacked immediately upon delivery. Check the outside of the appliance is not damaged in any way. Report all transit damage to your retailer. Connection to the water supply must be carried out by a qualified plumber. [. . . ] If you turn the programme selector to another programme while a cycle is in progress, the appliance will ignore the new selected programme. At the end of the programme, if you have selected "Rinse hold" or "Night cycle" , you then need to select a "Spin" or "Drain" programme to finish the cycle and empty the water. Night cycle : the cycle contains no spin and ends with a rinse hold. Selecting options You must select the different options after selecting the programme and before presspushbutton (see ing the "Start/Pause" "Programme table"). press the desired button(s) ; the corresponding lights come on. If one of the options is not compatible with the selected programme, "Err" flashes on the dispushbutton play and the "Start/Pause" flashes red. "Prewash" option The appliance runs a prewash at 30°C max. "Extra rinse" option The washing machine will add one or more rinses during the cycle. This option is recommended for people with sensitive skin and in soft water areas. Permanent : Hold down the "Prewash" and "Delay Start" pushbuttons for a few seconds. "Delay start" This option allows you to delay the start of a wash programme by 30, 60, 90, 2 hours to 20 hours. the selected time appears on the display for a few seconds. You can change or cancel the delayed start time at any time before you press the pushbutton, by pressing "Start/Pause" the "Delay start" pushbutton again (0' indicates immediate start). If you have already pressed the "Start/ pushbutton and you want to Pause" change or cancel the delayed start, proceed as follows : To cancel the delayed start and start the cycle immediately, press "Start/Pause" and then "Delay start" . To change the timer delay period, you position must go through the "Stop" and reprogramme your cycle. the lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pressing the pushbutton. After closing "Start/Pause" the lid again, press the "Start/Pause" pushbutton. Time Manager The cycle can be made longer or shorter by pushbuttons. Using the "Time Manager" The level of soiling of the laundry is also indicated. Warming up During the cycle, the symbol comes on when the appliance is reaching the right temperature. Interrupting a programme Adding washing is on, you When the "Add washing" light can add washing by proceeding as follows. [. . . ] ⷠThe anti-flooding security system has been activated, please proceed as follows : - close the water inlet tap, - empty the appliance for 2 minutes before unplugging, - call the after-sales service. ⷠYou have gone past the MAX indicator. 1) On some models, the audible signals can sound 2) After solving any problems, press "Start/Pause" button to restart the interrupted programme. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. [. . . ]