User manual AEG-ELECTROLUX EWF31276EW

[. . . ] EWF 31276 EW EWF 31076 EW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN WASHING MACHINE USER MANUAL 2 www. electrolux. com CONTENTS 1. 23 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. [. . . ] Flap for powder or liquid detergent. Liquid or powder detergent 1. 2. A 1 2 3. 4. B 14 www. electrolux. com • Position A for powder detergent (factory setting). When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. – Do not set the delay start. 9. 3 Activating the appliance Press the On/Off button to activate or deactivate the appliance. A tune sounds when the appliance is activated. 9. 4 Setting a programme 1. After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the programme duration agree with the laundry load. • The display shows the new value. 2. Turn the programme knob and set the programme: – The related programme indicator comes on. – The display shows the level of the Time Manager, the programme duration and the indicators of the programme phases If necessary, change the temperature, the spin speed, the cycle duration, or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message Err. 9. 6 Starting a programme with delay start • Press again and again until the display shows the delay you want to set. The related indicator comes on the display. : • Press – The appliance starts the countdown. – When the countdown is completed, the programme starts automatically. You can cancel or change the set of the delay start before you press . 1. 2. 9. 5 Starting a programme without delay start Press : • The indicator stops to flash and stays on. • The indicator starts to flash on the display. • The programme starts, the door is locked and the display shows the indi. cator • The drain pump can operate for a short time when the appliance fills water. To cancel the delay start: Press to set the appliance to pause. Press until the display shows Press again to start the programme immediately. ’. 9. 7 Interrupting a programme and changing the options You can change only some options before they operate. The programme continues. ENGLISH 15 9. 8 Cancelling a programme 1. 2. Press the button for some seconds to cancel the programme and to deactivate the appliance. Press the same button again to activate the appliance. [. . . ] Make sure the levelling of the appliance is correct. Make sure that the packaging and/or the transit bolts are removed. The appliance fills with Make sure that the drain hose is in the correct position. water and drain imme- The hose may be too low. [. . . ]