User manual AEG-ELECTROLUX F78000IMOP

[. . . ] Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. Before the installation and use, read this manual carefully: · For your safety and the safety of your property. Always keep these instructions with the appliance also if you move or give it to a different person. [. . . ] Fill the detergent dispenser only before you start a washing programme. It comes on when you activate the function. It comes on when you activate the function. It comes on when the washing phase operates. It comes on when the rinsing phases operate. It comes on when the drying phase operates. It comes on when the washing programme is completed. It comes on when it is necessary to fill the rinse aid dispenser. It comes on when it is necessary to fill the salt container. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. Contact your local water authority to know the water hardness in your area. Press the Program button again and again to change the setting. Fill the salt container with 1 litre of water (only for the first time you fill with salt). Use the funnel to fill the salt container with salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. It is correct that water comes out from the salt container when you fill it with salt. To help the environment, do not use more than the correct quantity of detergent. obey the instructions on the detergent packaging. If the washing programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use the detergent tablets, put the tablet in the detergent dispenser 1 . [. . . ] The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values. Starting the washing programme without delay start The selection of the function must always occur after the set of the washing programme. Starting the washing programme with delay start Press the Delay button again and again until the display shows the time of the delay start. When the countdown is completed, the washing programme starts automatically. [. . . ]