User manual AEG-ELECTROLUX F99000MP

[. . . ] Favorit 99000 User manual Dishwasher 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] Fill the rinse aid dispenser 3 with rinse aid. The mark 'max' shows the maximum level. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme. Press the lid until it locks into position. Adjust the rinse aid dosage Factory set: position 3. Multitab function 13 You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Turn the rinse aid selector 4 to increase or decrease the dosage. When the rinse aid dispenser is empty, the display shows a message: REFILL RINSE AID . The message does not show while a washing programme operates. Multitab function The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents. Do a check if these tablets are applicable for the local water hardness. Refer to the instructions from the manufacturer. When you set the multitab function, it stays on until you deactivate it. The multitab function deactivates the flow of rinse aid and salt. The multitab function deactivates the salt and the rinse aid messages. The programme duration can increase if you use the multitab function. Activate the multitab function before the start of a washing programme. You cannot activate the multitab function when the programme operates. To activate the multitab function · Go to the option menu and activate the multitab function. To deactivate the multitab function and use separately detergent, salt and rinse aid: 1. Go to the option menu and deactivate the multitab function. Fill the salt container and rinse aid dispenser. Adjust the water hardness setting to the highest level. [. . . ] Refer to 'Control panel'. Technical data 21 Technical data Dimensions Width Height Depth Water supply pressure Water supply 1) Capacity Minimum Maximum Cold water or hot water Place settings 596 mm 850 mm 625 mm 0, 5 bar (0, 05 MPa) 8 bar (0, 8 MPa) maximum 60 °C 12 1) Connect the water inlet hose to a water tap with a 3/4'' thread. The rating plate on the inner edge of the appliance door shows the electrical connection data. If the hot water comes from alternative sources of energy, (e. g. solar panels, photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. [. . . ]