User manual AEG-ELECTROLUX GA55LV102

[. . . ] Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 24 25 26 27 28 28 29 30 34 35 Setting and starting a washing programme 36 Washing programmes 37 Care and cleaning 38 What to do if. For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. [. . . ] Always close the door after you load or unload the appliance. Lower basket Put saucepans, lids, plates, salad bowls and cutlery in the lower basket. Put service dishes in the front part of the basket. The rows of prongs in the rear part of the basket can be flat to load pots, pans, bowls and deep dishes. You can adjust the width of the left row of prongs. Pull the row of prongs until it disengages. Push the row of prongs out of the guide. Put the row of prongs into the other guide. Push the row of prongs down until it engages in position. Put forks and spoons with the handles down. Hold the two rows of prongs on the left side at the rear part of the basket. Mix spoons with other cutlery to prevent them to bond together. Lower the handle of the cutlery basket to put the cutlery in the basket. If the dimensions of the cutlery prevent use of the cutlery grids, you can easily hide them. You can use these parts separately for more loading flexibility. To disassemble the parts, move them horizontally in opposite directions and pull them apart. To assemble the parts, put them together and move horizontally to each other. Adjustable cup racks For longer items, fold the cup racks up. You can set the cup racks in a medium position. Put or hang the glasses with the stems into the slots in the cup racks. Glass holder For glasses with long stems and longer glasses, fold the glass holder up (fig. If you do not use the glass holder, put it to the right side (fig. [. . . ] Make sure that the local water authority gives you the average mains pressure in your area. Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled. Do not connect the appliance to new pipes or pipes that are not used for a long time. Let the water run for some minutes, then connect the inlet hose. [. . . ]