User manual AEG-ELECTROLUX GS55AI220

[. . . ] Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. Thank you for choosing this AEG product. [. . . ] If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Make sure that the salt container and the rinse aid dispenser are full. Start the shortest programme with a rinsing phase, without detergent and without dishes. Make sure that the set level of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Do not use detergent and do not load the baskets. Press and hold buttons (8) and (9) at the same time until the programme indicators above buttons (8), (9) and (10) flash. The programme indicator above button (10) continues to flash. Press button (10) again and again to change the setting. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. Water and salt can come out from the salt container when you fill it. Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. Make sure that the release button locks into position. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). Set and start the correct programme for the type of load and the degree of soil. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use detergent tablets, put the tablet in the compartment (A). Make sure that the release button locks into position. [. . . ] â· Put hollow items (cups, glasses and pans) with the opening down. â· Make sure that cutlery and dishes do not bond together. Make sure that glasses do not touch other glasses. â· Make sure that the spray arms can move freely before you start a programme. [. . . ]