Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AEG-ELECTROLUX HBSE 100. We hope that this AEG-ELECTROLUX HBSE 100 user guide will be useful to you.
Lastmanuals help download the user guide AEG-ELECTROLUX HBSE 100.
Manual abstract: user guide AEG-ELECTROLUX HBSE 100
Detailed instructions for use are in the User's Guide.
[. . . ] Please read the instructions for use before first operation so you can handle your power tool effectively and safely. We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right choice!4, 2 kg J Please pay attention to the safety instructions in the attached leaflet! [. . . ] Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. When fitting the plug, make sure that the brown (live) wire of this appliance is connected to the plug terminal marked L or coloured red, and the blue (neutral) wire of this appliance is connected to the plug terminal marked N or coloured black. Under no circumstances must the wires of this appliance be connected to the earth terminal of the plug marked either E, with the earth symbol or coloured green or green/yellow. The belt sander can be used for sanding wood, plastics and metal. Do not use this product in another way as stated for normal use. In the interest of continuous improvement of our products, technical specifications are subject to alteration without prior notice. Always disconnect the plug from the socket before carrying out any work on the machine. Prior the changing belt, adjust sanding belt by turning the belt adjusting screw approx. 23 cm in the direction of the open side of the machine beyond the rollers, whilst the machine is running, as the new sanding belt can sometimes brush against the machine housing. Remove the worn belt and fit the inside of Push the clamping lever back again 4. Taking a test run, position the sanding belt With the aid of the belt adjusting screw so that it is flush with the outer edge of the sanding belt support. The speed is adjusted by means of the electronic thumb wheel. A = lowest speed F = highest speed Intermittent use Switching on: Press On-/off switch Switching off: Release On-/off switch Continuous use Switching on: Press the On-/off switch and then the locking button, after that release on-off switch. switching off: Press the On-/off switch and then release. Always hold machine firmly with both hand prior to switching on. When sanding, guide the machine without applying special pressure. [. . . ] If needed, an exploded view of the tool can be ordered. As well as the machine type printed on the label and order the drawing at your local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320, D71361 Winnenden. The range of accessories with part numbers is shown in our catalogue. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX HBSE 100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX HBSE 100 will begin.
