User manual AEG-ELECTROLUX LAVAMAT 70260 TL

[. . . ] L 70260 TL WASHING MACHINE USER MANUAL 2 CONTENTS 4 5 6 6 7 7 11 14 14 14 14 15 16 16 18 21 23 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL WASHING PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY USING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. [. . . ] Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. INTERRUPT A PROGRAMME 1. The washing programme continues. CANCEL THE DELAY START 1. Press button 5 again and again until the display shows 0'. The programme starts. CANCEL A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. OPEN THE LID While a programme or the delay start operates, the lid is locked. You can open the lid 2 minutes after the appliance stops. The door lock symbol in the display goes off. Open the lid. CHANGE A FUNCTION You can change only some functions before they operate. The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the lid . If necessary, do the following procedure to open the lid. Make sure that there is no water in the drum. If you deactivate the appliance, it is necessary to set the programme again. AT THE END OF PROGRAMME The appliance stops automatically. In the display The indicator of the Start/Pause button 4 goes off. · You can open the lid 2 minutes after the appliance stops. · Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the AUTO OFF function automatically deactivates the appliance. [. . . ] Replace the plastic spacer with the plastic cap. You can find this cap in the user manual bag. 15. To install the appliance at the same level as neighbouring furniture, cut these plastic pieces. WARNING!Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance. 26 POSITIONING AND LEVELLING 1. [. . . ]