User manual AEG-ELECTROLUX L75270SL

[. . . ] L 75270 SL WASHING MACHINE USER MANUAL 2 CONTENTS 4 6 6 7 7 8 12 15 15 15 16 17 18 20 22 27 30 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. [. . . ] To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. The indicator of button 4 is on. INTERRUPT A PROGRAMME 1. The washing programme continues. CANCEL A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 18 CHANGE A FUNCTION You can change only some functions before they operate. The programme starts. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. The door lock symbol in the display goes off. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. CANCEL THE DELAY START 1. Press button 5 again and again until the display shows 0'. AT THE END OF THE PROGRAMME The appliance stops automatically. The indicator of the Start/Pause button 4 goes off. · Press button 1 to deactivate the appliance. [. . . ] Pull up the appliance in vertical position. 2 9. Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. Pull out the plastic spacers. 32 12. You can find these caps in the user manual bag. ­ We recommend that you keep the packaging and the transit bolts for when you move the appliance. [. . . ]