User manual AEG-ELECTROLUX LAVAMAT 75283 FL

[. . . ] L 75280 FL L 75282 FL L 75283 FL L 75286 FL L 75287 FL L 75480 FL L 75483 FL WASHING MACHINE USER MANUAL 2 CONTENTS 4 6 6 7 7 8 11 14 14 14 15 16 17 18 19 23 26 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL DATA PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. [. . . ] The related programme indicator comes on. The indicator of button 4 flashes with red colour. The display shows the default temperature and spin speed. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. The indicator of button 4 is on. INTERRUPT A PROGRAMME 1. The washing programme continues. CANCEL A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. ENGLISH 17 CHANGE A FUNCTION You can change only some functions before they operate. The programme starts. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. The door lock symbol in the display goes off. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. [. . . ] Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. Pull out the plastic spacers. 28 12. Replace the plastic spacers with the plastic caps. [. . . ]