User manual AEG-ELECTROLUX L75671FL

[. . . ] L 75470 FL L 75670 FL L 75471 FL L 75671 FL WASHING MACHINE USER MANUAL 2 CONTENTS 4 5 7 7 8 11 14 14 14 15 16 17 19 21 26 29 SAFETY INFORMATION TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. [. . . ] The washing programme continues. CANCEL A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. ENGLISH 17 CHANGE A FUNCTION You can change only some functions before they operate. Press button 5 again and again until the display shows 0'. The programme starts. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. The door lock symbol in the display goes off. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. If you deactivate the appliance, it is necessary to set the programme again. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. CANCEL THE DELAY START 1. The related indicator flashes. AT THE END OF THE PROGRAMME The appliance stops automatically. The indicator of the Start/Pause button 4 goes off. · Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. [. . . ] Pull up the appliance in vertical position. 2 9. Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. Pull out the plastic spacers. ENGLISH 31 12. Replace the plastic spacers with the plastic caps. [. . . ]