User manual AEG-ELECTROLUX L85270XFL

[. . . ] G50 XXL 1600 XFL G50 XXL 1400 XFL G50 XXL 1200 XFL EN WASHING MACHINE USER MANUAL 2 www. aeg. com CONTENTS 4 5 7 7 8 13 17 17 17 17 19 20 21 23 28 31 SAFETY INFORMATION TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. [. . . ] With the flap in the position DOWN: ­ Do not use gelatinous or thick liquid detergents. ­ Do not put more liquid detergent than the limit showed in the flap. ­ Do not set the delay start function. 5. 6. Measure out the detergent and the fabric conditioner. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. SETTING AND STARTING A PROGRAMME 1. The related programme indicator comes on. 2. Press button 4 again. The washing programme continues. The indicator of button 4 flashes with red colour. The display shows the default temperature, the spin speed and the empty indicator bars of the available functions. To change the temperature and/or the spin speed, press the related buttons. Set the available functions. 6. CANCEL A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. Press button 1 again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. 2. Press button 4 to start the programme. The indicator of button 4 is on. CHANGE A FUNCTION You can change only some functions before they operate. 1. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. Press button 4 . Change the function set. SET THE DELAY START 1. INTERRUPT A PROGRAMME 1. Press button 4 . The indicator flashes. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. 2. 20 www. aeg. com When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. To open the appliance door: 1. Press button 4 . The door lock symbol in the display goes off. [. . . ] 8. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical position. 1 2 9. Remove the power supply cable and the drain hose from the hose holders. 10. Use the key supplied with the appliance. 11. Pull out the plastic spacers. ENGLISH 33 12. [. . . ]