User manual AEG-ELECTROLUX L88489FLP2

[. . . ] L 88489 FLP2 EN WASHING MACHINE USER MANUAL 2 www. aeg. com CONTENTS 4 5 7 7 8 13 16 17 17 17 18 20 20 22 24 29 32 SAFETY INFORMATION TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES CONSUMPTION VALUES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES STARTING A PROGRAMME AT THE END OF THE PROGRAMME HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. [. . . ] Put the product in the compartment before you start the programme. This is the maximum level for the quantity of liquid additives. Put the product in the compartment and set the stain function before you start the programme. Flap for powder or liquid detergent Turn it (up or down) in the correct position to use powder or liquid detergent. Always obey the instructions that you find on the packaging of the detergent products. ENGLISH 19 Check the position of the flap 1. Pull out the detergent dispenser until it stops. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: ­ Do not use gelatinous or thick liquid detergents. ­ Do not put more liquid detergent than the limit showed in the flap. ­ Do not set the delay start function. 5. 6. Measure out the detergent and the fabric conditioner. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. When the countdown is completed, the programme starts automatically. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. 2. 20 www. aeg. com Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. 2. 3. Press button 5 again and again until the display shows 0'. The programme starts. CANCEL THE DELAY START 1. Press button 4 . The related indicator flashes. STARTING A PROGRAMME · Press button 4 to start the programme. · On the display all symbols related to the load and to the quantity of detergent go off. If a delayed start is set, the appliance starts the countdown. CHANGE A FUNCTION You can change only some functions before they operate. 1. Press button 4 . Change the function set. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. [. . . ] Make sure not to damage the hoses. 7. 8. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical position. 1 2 9. Remove the power supply cable and the drain hose from the hose holders. 34 www. aeg. com 10. Use the key supplied with the appliance. 11. [. . . ]