User manual AEG-ELECTROLUX ÖAS2385-4GT

[. . . ] That is the time set is based on the delay of the current time. Warning 1. Be sure there are no obstacles between the remote controller and the receiver of indoor unit otherwise the air conditioner will not work. Keep the Remote Controller away from any liquids. Protect the remote controller from the high temperatures and exposure to radiation. [. . . ] Each time the button is pressed, the fan speed mode is shifted. TIMER ON Button: Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10:00, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0:00. ECONOMY Button: Press this button to go into the Energy-Saving operation mode. This function is only can be used on COOL, HEAT and AUTO mode and maintain the most comfortable temperature for you. NOTE: While the unit is running under SLEEP operation mode, it would be canceled if you press the other button. ~ 4 5 Performance Features 1. Operating Mode: AUTO COOL DRY HEAT(Cooling only model without) and FAN . Indoor Setting Temperature Range : 17 C~30 C. Full function of LCD (Liquid Crystal Display) 6 Features of Remote controller buttons 7 8 9 1 3 4 5 6 7 11 8 9 2 10 10 12 11 13 14 15 ! Fig. When replacing batteries, do not use old batteries or a different type battery. This may cause the remote control to malfunction. If you do not use the remote controller for several weeks remove the batteries. Otherwise battery leakage may damage the remote controller. The average battery life under normal use is about 6 months. Replace the batteries when there is no answering beep from the indoor unit or if the Transmission Indicator light fails to light. 3 4 AUTOMATIC OPERATION Switch on the power and the OPERATION indication lamp on the display panel of the indoor unit starts flashing, and turns off after flashes for 6 times. Push the TEMP button to set the desired room temperature . The most comfortable temperature settings are between 21 C o to 28 C. Push the ON/OFF button to start the air conditioner. The OPERATION lamp on the display panel of the indoor unit lights. The FAN SPEED is automatically set and there are no fan speed indicators shown on the display panel of the remote controller. [. . . ] 2. 2 Push the TIMER OFF button again to set the time you want to stop the operation. 2. 3 After setting the TIMER OFF , there will be a one-half second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" disappears and the set temperature will re-appear on the digital display. NOTE 1. In the AUTO mode, the air conditioner can logically choose the mode of COOL, FAN and HEAT by sensing the difference between the actual ambient room temperature and the set temperature on the remote controller. [. . . ]