User manual AEG-ELECTROLUX RAPIDO ZB406

[. . . ] In order to ensure the best results, always use original Electrolux accessories. They have been designed especially for your vacuum cleaner. On/off button with booster (max) function* Fine filter Prefilter Dust container Release button Charging indicator light Vacuum cleaning cover 8. [. . . ] In order to ensure that it is always ready for use, Rapido should be left on charge when not being used. The adaptor may become warm during charging ­ this is normal. Underneath the charging station there is a hollow space where redundant cable can be wound (13a). The wall unit can be mounted on a wall etc (13b). Detach the wall unit by unscrewing the screw underneath the floor unit (13c). Always ensure that the wall can bear the weight of the Rapido. Remove your vacuum cleaner from the charging station by lifting it straight upwards. The crevice nozzle and small brush are positioned in the charging station (16a)* or underneath the vacuum cleaner (16b)*. Attach the crevice nozzle to the vacuum cleaner to facilitate cleaning of areas difficult to reach or attach the brush for dusting. Rapido's dust container must be emptied when it's full. Every now and then the dust container and the filters need to be cleaned to maintain a high suction power. Release the whole dust container by pushing the release button (18a), remove the filters and empty the contents into a wastepaper basket (18b). Return the filters and press back the dust container until it clicks into place. Release the whole dust container by pushing the release button (18a). [. . . ] Trong trng hp may không hoat ông hoc bi lôi, ban phai mang may Rapido ên môt trung tâm dich vu c Electrolux uy quyên. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ]