User manual AEG-ELECTROLUX T86589IH2

[. . . ] 28 30 31 32 33 33 36 39 40 45 47 48 49 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] Use the programme dial to set the programme. The possible time to complete the programme come into view on the display. The drying time you see is related to the load of 5 kg for cotton and jeans programmes. For the other programmes the drying time is related to the recommended loads. The drying time of the cotton and jeans programmes with the load more than 5 kg is longer. 9 The Spun at RPM (T/Min) function This function helps to set the best condition to dry the laundry. If you know the initial spin speed when you washed you can use this function. Higher spin speed causes that the laundry contains less water. 6 Special functions Together with the programme you can set 1 or more special functions. To activate or deactivate the function push the applicable push button. 10 The Buzzer (Zoemer) function When the buzzer function is activated you can hear the buzzer at the: • cycle end • anti-crease phase start and end • cycle interruption The buzzer function is by default always on. You can use this function to activate or deactivate the sound. 11 The Time Drying (Droogtijd) function When the function is activated the applicable symbol comes into the view on the display. Operates only with the Time (Tijd) programme. Lets the user to set special time of drying programme from minimum 10 min. 12 The Delay Start (Startuitstel) function Let to delay the start of a drying programme from minimum of 30 minutes to maximum of 20 hours. To activate the programme push the button as on the illustration. The LED above the button illuminates in red colour. Push the On/Off to activate the appliance and then set the programme again. Push the Delay Start (Startuitstel) button again and again until the necessary time of the delay come into the view on the display (e. If the programme has to start after 12 hours. 16 At the end of programme When the drying cycle is completed, the symbol flashes on the display. [. . . ] This can increase the heat which can cause interference with the operation of the appliance. €¢ The temperature of the hot air which occurs in the tumble dryer can increase to 60 °C. The appliance must not be installed on the floor which is not resistant to high temperatures. €¢ When the tumble dryer operates, the room temperature must not be lower than +5 °C and higher than +35 °C. [. . . ]