User manual AEG-ELECTROLUX TR742G

[. . . ] If repairs become necessary, please contact the Customer Care Department or your authorised dealer. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. With the warning triangle and/or by means of key words (Danger!), information is emphasized which is important for your safety or the correct functioning of the appliance. [. . . ] Always lift only with the thermally insulated handles. The mains cable must not come into contact with any hot parts of the appliance. Never place the appliance over or near a naked flame, hot plate or hot oven. The mains cable with thermostat must never become wet. Never clean under running water or even in rinsing water. Only the appropriate mains cable with thermostat must be used. If necessary an extension cable suitable for 10 A can be used. Avoid danger of tripping when connecting the power supply cable. This must never come into contact with water or other liquids. The grill plate must only be put into operation on the base frame and with the drip tray fitted. Never cover the heater plate with aluminium foil, pots, pans or similar objects, since this can result in an accumulation of heat, which can destroy the plastic components and coating. The food does not dry out and is cooked more evenly. 3 To simplify cleaning, the drip tray should be covered with aluminium foil. 0 Inserting the heater plate (3) in the base frame. 0 Apply a little cooking oil to the surface of the heater plate each time before use with the aid of kitchen paper for better non-stick properties. Use of the splash guard is particularly recommended for grilling items containing fat. The splash guard also serves as wind protection out of doors. Withdraw the mains plug every time before cleaning!Dry all parts thoroughly before putting away. Ensure that the plug contacts of the heater plate are dry before connecting the thermostat to the heater plate. If necessary, wipe over with a cloth or shake out water thoroughly. When the temperature is reached, heating takes place at intervals to maintain the temperature constant. [. . . ] Note that water must not penetrate inside the thermostat under any circumstances!Never clean under running water or even in rinsing water. This can therefore also be cleaned in a dishwasher. Under no circumstances use abrasive cleaning agents, abrasive general purpose scouring pads, metal wool, etc. [. . . ]