User manual AEG-ELECTROLUX TRI ETN1201H KM ELUX

[. . . ] correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. ⷠDo not put any solvents in the dishwasher. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Avoid opening the door whilst the appliance is in operation, hot steam may escape. [. . . ] The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart. Glasses with long stems can be placed upside down in the cup racks. For taller items, the cup racks can be folded upwards. Arrange items on and underneath the cup racks so that water can reach all surfaces. For glasses with long stems (according to the size and dimensions), set the glass holder to the left or right position. The central rows of prongs can be easily lowered to improve loading flexibility. Before closing the door, ensured that the spray arms can rotate freely. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it. Never lift or lower the basket on one side only. Once the programme is running, the "Multitab function " can NO longer be changed. If you want to cancel the "Multitab function " you have to cancel the programme setting and then deactivate the ''Multitab function''. In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the multitab function Simultaneously press and hold the two multitab buttons (function buttons D and E) until the multitab indicator light comes on. this means that the function is active. To deactivate the function press the same buttons again until the indicator light corresponding to the multitab function symbol goes off. If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. The dishes should therefore be allowed to cool down before removing from the appliance. ⷠEmpty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ⷠWater may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. [. . . ] If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: · the electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. A water inlet hose with safety valve must only be replaced by the Service Force Centre. [. . . ]