User manual AEG-ELECTROLUX TWSL3M100

[. . . ] Operating Instructions Tumble dryer Electrolux TW SL3 M100 Dear Electrolux customer!Welcome to the family of Electrolux customers. We hope that you will have many years of use from your new machine. To make the most of its functions, we recommend that you read the operating instructions before using the machine. [. . . ] Press the Stop button once to save the setting. Language 1. Turn the programme selector to choose from: US English, English, svenska, dansk, norsk, Suomea, Français, Deutsch, Italiano, Espanol, Русский, Nederlands. Press the Stop button once to save the setting. Child-safe You can activate the Child-safe start option to prevent children from starting the machine. Turn the programme selector and choose "Child-safe On" or "Child-safe Off". Press the Stop button once to save the setting. You can temporarily deactivate Child-safe start by pressing the Start and Stop buttons at the same time. Child-safe start will be deactivated for 3 minutes. 14 Care and cleaning Cleaning the lint filter The lint filter must be cleaned after each load. Grasp the filter handle and pull it towards you. Emptying the condensed water container 2. Open the filter and remove the lint from all sides of it by hand. Use a soft dry cloth and, if necessary, a sponge with a small amount of washing-up liquid to remove any deposits. Dry the filter carefully with a towel. If you have not connected the machine to a separate drain the condensed water container must be emptied after each load. Remove the condensed water container, empty out the water and replace the container. If the condensed water container becomes full to overflowing, the programme is interrupted and "Over Flow" appears on the display. Empty the container and press the Start button to restart the programme. Close the filter before closing the door. For connection to a separate drain, see the installation instructions in the set of documents. 15 Care and cleaning Cleaning the steamer filter Lint should be cleaned from the net filter and the foam filter inside the steamer door at the intervals shown on the machine's display or more often. Wash the foam filter in a washing machine using a rinse or quick wash programme. The lint is washed away and the filter is not damaged. Clean the steamer by spraying water on the ribs with a plant spray bottle. The lint runs off together with the water, which is then evacuated by the condensed water pump. 3. Pull out the filter by grasping the "handle" in the middle. 8. Replace both filters and close the steamer door. [. . . ] Such installation must be carried out by a qualified professional. The installation requires a connection cable to power the coin meter. This connection cable can be ordered using the factory art. The coin meter shall be able to short circuit two signal lines for periods of up to 10 minutes. [. . . ]