User manual AEG-ELECTROLUX WASL5M102

[. . . ] Only use appliance after first reading these instructions!We are pleased that you have chosen a Electrolux washing machine. Your new washing machine is the result of many years of development work. the highest quality requirements , both in development and manufacture , guarantee a long lifetime. [. . . ] The intensive programme can be used for boil or coloured washes as well as for easy care fabrics. Note The programmes «Express», «Prewash», «Intensive» and the ecoPlus programme exclude each other, this means that only one of these additional programmes can be selected. Super Finish This programme serves to reduce the formation of creases and wrinkles by means of higher water levels, slower cooling of the detergent solution and gentle spinning. It can be activated for boil wash and coloureds as well as easy care fabrics. Money-saving tip If the laundry is to be dried in a tumble dryer, select a high spin speed since well-drained laundry needs much less energy and time for machine drying. Select rinsing stop by reducing the spin speed until you see «Rinsing stop» on the display. You can end the programme by draining the laundry without spinning or by spinning (see chapter «Washing/ Ending the programme with rinsing stop»). Quick Wash The programme can be shortened or aborted by pressing the quick wash button. x See chapter «Washing/ Cancelling the programme»). This button can also be used to select special programmes. x See chapter «Washing/Particular programmes». The additional function «Quick Wash» is not available with the autoClean programme. Function switched on Additional rinse (ex factory OFF) + To improve the rinse results in soft water areas or for allergy sufferers, switch on the extra rinse. Water level during wash (ex factory NORMAL) + If the function is set to «increased», the water level is higher during washing. Water level during rinse (ex factory NORMAL) + If the function is set to «increased», the water level is higher during rinsing. Spin speed reduction (ex factory OFF) + It can be adapted to the user>s individual needs either when first used or later using the following functions. The basic settings can only be changed if no wash programme is running. To change a basic setting, it is first necessary to hold the programme button pressed and then press the quick wash button. the corresponding function is shown on the digital display. The display changes when the quick wash button is pressed repeatedly with the programme button held down. The basic settings on your machine may be blocked. However, the time setting and language selection functions are available. [. . . ] X Check whether the supply and drain hose connections are watertight and have been effected properly. spinning and noise Pump noise: No malfunction!Intake noise and «Emptying» noise (i. With underloads or critical laundry pieces such as bath mats, the laundry is insufficiently distributed. [. . . ]