User manual AEG-ELECTROLUX Z7320KRE

[. . . ] Fluids (this can cause serious damage to the machine). Fine dust, for example from plaster, concrete, flour, hot or cold ashes. The above may cause serious damage to the motor ­ damage which is not covered by the warranty. [. . . ] You can also reduce suction power for rugs. Using the motorised floor nozzle* 3 The motorised floor nozzle is ideal for both hard floors and carpets. The motorised floor nozzle receives its low voltage electrical feed via the telescopic tube and hose, and no extra connection is required. a blue light on the nozzle indicates that the brushroll is turning. As soon as you lift the motorised floor nozzle the brushroll stops automatically, and the light goes out. NB: Do not use the motorised nozzle on rugs with long fringes or a pile depth exceeding 15 mm. In order to avoid damage to the carpet, do not let the nozzle stand still while the brushroll is rotating. Do not run over electric cables and turn off the vacuum cleaner immediately after use. Oxygen+ can help reduce back strain whilst cleaning your home 1 To help reduce back strain, Oxygen+ features a flexible handle that makes it easier to lift and carry the machine. 2a Additionally, the convenient parking position helps when you take a break during vacuuming. How to use the telescopic tube Assemble the hard floor nozzle on the telescopic tube so that the catch clicks shut. Remove by pressing the catch in and pulling the pieces apart. extend or shorten the telescopic tube by pushing the locking button in the direction of the nozzle and simultaneously adjusting the length of the telescopic tube. There is a catch at both ends of the telescopic tube. 1a The s-bag® dustbag must be cleaned when the indicator light illuminated. 3 Remove the dustbag holder 4 Pull the cardboard to take the s-bag® out the grooves. This automatically seals the dustbag and prevents dust from leaking out of the bag. 5 Insert a new s-bag® by pushing the cardboard to the end of the grooves in the holder, you will feel a "click". [. . . ] 5 In order to remove the brushroll cover, push the outer cover out, and the middle cover to the right, and this will also free the wheels for cleaning. Remove any hairs that may have got stuck by snipping them away with scissors. 4b The auxiliary wheel should be carefully pulled straight out. [. . . ]