User manual AEG-ELECTROLUX ZAM6250

[. . . ] The above can cause serious damage to the motor ­ damage which is not covered by the warranty. electrical cable precautions: · If the supply cord is damaged, it must be replaced by the manufacturer, it's service agent or similary quali ed person in order to avoid a hazard. Damage to the cleaner cable will not be covered by the warranty. Disconnect the plug from the wall socket before cleaning or maintaining the vacuum cleaner. [. . . ] All service and repairs must be carried out by an authorised Electrolux service centre. Always keep the vacuum cleaner in a dry place. Extend the cord and plug it into the wall socket. ) Adjust suction power using the power control button on the vacuum cleaner or the suction control on the hose handle. ) A practical parking feature (as well as minimizing the risk of breakage) makes things easier when pausing during cleaning. ) The parking feature makes it easier to move and store the vacuum cleaner. Special combined nozzle: Detach the nozzle from the accessory dock and use it for bookshelves (with folding out of the , , brush" end) or crevices, corners (with the , , crevice" end) (8. Note: Do not use the power or turbo nozzle on fur rugs, rugs with long fringes or a pile depth exceeding 15 mm. to avoid damaging the carpet , do not keep the nozzle stationary whilst the brush is rotating. Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. This product is designed with the environment in mind. If you are experiencing difficulties in finding the right dustbag, filter or accessories to your new vacummcleaner - please call our callcentre (you will find the number in the warranty folder) or visit our webshop at www. In such cases, disconnect from wall socket and allow to cool for 20-30 minutes. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to the hose caused by cleaning it. ) To avoid deterioration of suction power, frequently clean the carpet/hard floor nozzle. The easiest way to clean it is by using the hose handle. Use the hose handle to clean the nozzle. [. . . ] The easiest way to clean it is by using the hose handle. Use the hose handle to clean the nozzle. ) In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely. Om du behöver dammsugarpåsar, filter eller andra tillbehör (munstycken, rör, extra tillbehör) till din nya dammsugare och har svårigheter att hitta dessa - vänligen ring vår kundtjänst (nummer finns i garanti foldern) eller besök vår web shop på www. [. . . ]