User manual AGFAPHOTO DC-302

[. . . ] Do not attempt to service this camera yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. This will invalidate all guarantee claims. Do not expose this camera under direct sunlight to avoid causing a fire. 1. 2 Before using the DC-302 Try to take some pictures before you perform the formal recording. [. . . ] 3. 5. 2 Self-timer Press the menu button into the menu, change to the self-timer mode, after that press the menu button to confirm. Press the shutter button, the self-timer LED will blink for 10 seconds and then capture a picture. 17 3. 5. 3 Take video Press the menu button into the menu and change to the video mode. Press the menu button to confirm your choice. Press the shutter button to start recording. Press the shutter button again to stop recording. 3. 5. 4 Use the flash Press the flash button into the FLASH AUTO or ON mode, the camera will charge the flash; the monitor screen will be close and the operation LED will blink. When LED stops blinking and the monitor screen turns on, the charging is done. The FLASH ON function will always fire the flash, the FLASH AUTO function will fire automatically as needed. When the shutter button is pressed, the flash will fire. 3. 5. 5 Use the digital zoom In the REC mode you can use the digital zoom. Before taking videos press the UP button to zoom in, press the DOWN button to zoom out. 18 3. 5. 6 Playback mode Press the playback button to come to the playback mode. You can view up 9 pictures and video clip files on the LCD screen. Press the DISPLAY button and up to 9 files appear on the screen. In the one picture mode, press the UP or DOWN button and zoom in or zoom out of the picture. If a video is selected in the nine picture mode, press the DISPLAY button and playback of the video starts. 3. 5. 7 Download Turn the camera on to the preview mode and connect the camera to the computer via a USB cable. In Windows 2000/ME/XP/VISTA, there is no need to install the driver. The LCD screen will display MSDC and the camera will be recognized as a removable FLASH DISK. You can directly copy the pictures from the camera to your computer. 3. 5. 8 How to use the PC camera function Install the camera driver from the CD. Connect the camera to the computer with a USB cable, run the program Amcap under the folder <Sunplus 19 Ca533> in the program, select the device as Sunplus SPCA533. After that select Options as Preview. 20 If you want to change the imaging size, select the Video Capture Pin then change the output Size. 4. How to install and use the Accompanying application Insert the accompanying CD into the CD-ROM drive and the install dialogue box will appear automatically. 21 4. 1 Driver Installation Click on Camera Driver button and follow the next steps. 22 23 Set the camera to recording mode and connect it to the computer. [. . . ] Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. When shielded interface cables have been provided with the product or when specified additional components or accessories have elsewhere been designated to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. 37 8. Customer care More information to the complete product range can be found under: www. plawa. com Service & Repair Hotline (Europe): 00800 75292100 (from landline only) Service & Support Hotline (Germany): 0900 1000 156 (0. 49 Cent/ min. German landline only) Online Service: support-apdc@plawa. com (German / English) Service address (Turkey): Emirgazi Cad. [. . . ]