User manual AGFAPHOTO DC-733I

[. . . ] Thank you for purchasing this DC-733i digital camera. Please read these operating instructions carefully in order to use the product correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Disclaimer We assume no responsibility over and above the provisions of the Product Liability Law for damages suffered by the user or third parties as a result of inappropriate handling of the product or its accessories, or by their operational failure and by their use. [. . . ] The LCD monitor displays the available recording time ( ). 3 Start recording. Press the shutter button ( ) to start recording. Using the zoom button ( ) to adjust the image size. The White Balance is set and locked to the settings of the first frame Caution Sound cannot be recorded while pressing the zoom button. The digital zoom cannot be used in Movie mode. 4 Finish recording. Press the shutter again to end recording. The camera will stop recording automatically when the memory capacity has been reached. Setting the Movie Size Movie Size and Frame Rate Resolution 640 x 480 320 x 240 160 x 120 30 frames/sec. Lower Quality Frame Rate Higher Quality 26 Recording Audio Clips 1 2 Turn the power on, and set the camera to the Voice REC mode ( page 13). Press the shutter button ( ) to start recording. The voices are recorded from the microphone ( ) of the camera. Be careful to avoid touching the microphone while recording 3 Press the shutter button again to end recording. The camera will stop recording automatically when the memory capacity has been reached. Playing Back Audio Clips 1 2 3 Turn the power on, and set the camera to the PLAY mode ( page 13). Press or to select the audio clip that you want to playback. Start playing back. Press Press to start playing the audio clip. to stop the audio clip, or press again to resume. When audio clip paused, press 27 Recording a Voice Memo You can add a voice memo to the still images after you record it. 1 2 Turn the power on, and set the camera to the PLAY mode ( Press or page 13). to select a still image that you want to add a voice memo. If the image already has the voice memo recorded, the icon appears on the LCD monitor. The new recording will replace the previous one. 3 4 Open the PLAY menu. Press the MENU button, using four-way control to select Voice Memo ( ) and press the SET button. Press the SET button to start recording for 30 seconds. Press the SET button again to end recording. Caution The voice memo cannot be added to a movie clip or a protected image. When you delete the image, the attached voice memo is also deleted. Playing Back a Voice Memo 1 2 3 Turn the power on, and set the camera to the PLAY mode ( page 13). Press or to select the image that has the voice memo recorded. Start playing back. Press Press to start playing the voice memo. to stop the voice memo, or press again to resume. When voice memo paused, press 28 Other Recording Functions Setting the Metering There are 3 different light metering options available on your camera. [. . . ] The subject was beyond the range within which the camera can focus. Turn the Macro mode on it the subject is within 15 cm (zoom out) or 40 cm (zoom in). Do not use Macro mode when shooting distant subjects. Image is not displayed on the LCD monitor. [. . . ]