User manual AIPTEK POCKETCAM 8200

[. . . ] User's Manual English This device adopts Cam5X2 series built-in software. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] In the menu, use the Left/Right Buttons ( ) to highlight the File Infor. (File information) item, and press the Menu/OK Button ( ) to confirm. MENU File Infor. 3. In the subsequent menu, use the Left/Right Buttons ( ) to select On or Off, and press the Menu/OK Button ( ) to confirm. File Infor. Off - 37 - CAMERA SETTINGS Camera settings mode Set the Mode Switch to Camera Settings mode, and the following screen will appear. For detailed information on each setting, please refer to the corresponding page. Camera Settings Page 38 Page 39 Page 39 Page 40 MENU Time: Page 40 Page 41, 42 Page 43 Setting date and time 1. Select the Time item and press the Menu/OK Button ( ). 2. Use the Left/Right Buttons ( ) to adjust the value. Press the Menu/OK Button ( ) to confirm the setting and move to next field. Repeat the setting until all fields are done. Pressing the Shutter/Record Button can quick-exit the menu. Time Year Month Day Hour Minute : : : : : 2005 05 20 12 01 - 38 - Setting beep sound 1. Select the Beep item and press the Menu/OK Button ( ). 2. Use the Left/Right Buttons ( ) to select On or Off, and press the Menu/OK Button ( ) to confirm. Beep Off Setting date stamp 1. Select the Date Stamp item and press the Menu/OK Button ( ). 2. Use the Left/Right Buttons ( ) to select On or Off, and press the Menu/OK Button ( ) to confirm. Date Stamp Off - 39 - Setting flicker 1. Select the Flicker item and press the Menu/OK Button ( ). 2. Use the Left/Right Buttons ( ) to select 50HZ or 60HZ according to the standard of your country, and press the Menu/OK Button ( ) to confirm. 62) Flicker 60 HZ Setting language 1. Select the Language item and press the Menu/OK Button ( ). 2. Use the Left/Right Buttons Language ( ) to select your preferred language, and press the Menu/ OK Button ( ) to confirm. Pressing the Shutter/Record Button can quick-exit the menu. English - 40 - Setting TV system 1. Select the TV Set item and press the Menu/OK Button ( ). In the next menu, select the TV System item and press the Menu/OK Button ( ) to continue. TV Set MENU TV: NTSC TV System 2. Use the Left/Right Buttons ( ) to select NTSC or PAL, and press the Menu/OK Button ( ) to confirm. [. . . ] Use the "Files of type" pull-down to filter the file types you'd like to display. Preview highlighted files to be sure that they're the ones you want. Check the "AutoPlay" box to start the playback automatically after you click a file. 3 Repeat steps 1 and 2 above until all the files you want are added. [. . . ]