User manual AIRLIVE ARM-201

[. . . ] ARM-201 Wired ADSL2/2+ Ethernet/USB Modem User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Wired ADSL2/2+ Ethernet/USB Modem AirLive ARM-201 is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Limits and methods of measurement of radio disturbance characteristics of information technology equipment Disturbances in supply systems caused by household appliances and similar electrical equipment "Harmonics" Disturbances in supply systems caused by household appliances and similar electrical equipment "Voltage fluctuations" Information Technology equipment-Immunity characteristics-Limits And methods of measurement 55022:1998/A1 :2000/A2:2003 61000-3-2:2000 EN EN 61000-3-3:1995/ A1:2001 55024:1998/A1 :2001/A2:2003 EN EN 60950-1:2001/A11 Safety for information technology equipment including electrical :2004 business equipment marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2008/1/1 AirLive ARM-201 CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive ARM-201 je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive ARM-201 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] That device must be set as a DHCP client to obtain the IP address automatically. The DHCP address pool contains the range of the IP address that will automatically be assigned to the client on the network. Starting IP address: The starting IP address for the DHCP server's IP assignment. Lease Time: The length of time for the IP lease. [DHCP Relay] A DHCP relay is a computer that forwards DHCP data between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enable, the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To have this function working properly, please run on router mode only, disable the DHCP server on the LAN port, and make sure the routing table has the correct routing entry. DHCP Server IP for relay agent: The DHCP server IP Address runs on WAN side. [DNS Relay] The DNS Configuration allows the user to set the configuration of DNS. DNS Rely Selection: If user wants to disable this feature, he just needs to set both Primary & Secondary DNS to 0. 0. 0. 0. Using DNS relay, users can setup DNS server IP to 192. 168. 2. 1 on their computer. If not, device will perform as NO DNS relay. 52 AirLive ARM-201 User's Manual 4. 4 Advanced Setup User can enable or disable firewall feature of the ADSL router in the page. 4. 4. 1 Firewall 4. 4. 2 Routing This table lists IP address of Internet destinations commonly accessed by your network. When a computer requests to send data to a listed destination, the device uses the Gateway IP to identify the first Internet router it should contact to route the data most efficiently. Select this option will list the routing table information. You can press ADD ROUTE to edit the static route. [Static Route] Select this option to set Static Routing information. 53 AirLive ARM-201 User's Manual Destination IP Address: This parameter specifies the IP network address of the final destination. IP Subnet Mask: Enter the subnet mask for this destination. Gateway IP Address: Enter the IP address of the gateway. The gateway is an immediate neighbor of your ADSL Router that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your Router; over Internet (WAN), the gateway must be the IP address of one of the remote nodes. Metric: Metric represents the "cost" of transmission for routing purposes. IP Routing uses hop count as the measurement of cost, with a minimum of 1 for directly connected networks. Enter a number that approximates the cost for this link. The number need not to be precise, but it must between 1 and 15. [. . . ] When the ADSL LED begins to blink, the defaults have been restored and the router restarts. 3 The default username is "admin". The default password is "airlive". The Password and Username fields are case-sensitive. [. . . ]