User manual AIRLIVE ETHER-FSH2422W

[. . . ] Ether-FSH2422W 24+2G Web Management Switch User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 24+2 ports Mixed Gigabit Combo Web Management Switch AirLive Ether-FSH2422W is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Limits and methods of measurement of radio disturbance characteristics of information technology equipment Disturbances in supply systems caused by household appliances and similar electrical equipment "Harmonics" Disturbances in supply systems caused by household appliances and similar electrical equipment "Voltage fluctuations" Information Technology equipment-Immunity characteristics-Limits And methods of measurement 55022:2006 EN 61000-3-2:2000/ A2:2005 61000-3-3:1995/ A1:2001/A2:2005 55024:1998/A1 :2001/A2:2003 marking EN EN CE Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/2/14 AirLive Ether-FSH2422W CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive Ether-FSH2422W je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive Ether-FSH2422W overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] IP Address: Manually assign the IP address that the network is using. If DHCP function is enabled, the user doesn't need to assign the IP address. And, the network DHCP server will assign the IP address displaying in this column for the switch. Subnet Mask: Assign the subnet mask to the IP address. If DHCP function is enabled, and then the user does not need to assign the subnet mask. Gateway: Assign the network gateway for the Ether-FSH2422W. IP Configure: Select the IP addressing mode--Static or DHCP. With Static mode, the user has to fill in IP address, Subnet Mask and Gateway in the fields respectively. When the radio button of DHCP is selected, the switch will be assigned an IP address from the network DHCP server. The default IP address will be replaced by the assigned IP address on DHCP server. Click the Update button to apply the setting. System IP Configuration interface AirLive Ether-FSH2422W User's Manual 12 4-4-3 System Status This page displays the information about the switch's MAC address, how many ports it has, system version and kernel version. Besides, users can also fill in up to 12 characters in the Comment field for note. MAC Address: Displays the unique hardware address assigned by manufacturer (default). Number of Ports: Displays how many ports there are in the switch. Comment: Users can fill in up to 12 characters in this field. Click the Update button to save the comments. System Version: Displays the switch's firmware version Kernel Version: Displays the kernel version And than, click Apply button. System Status interface AirLive Ether-FSH2422W User's Manual 13 4-4-4 Default Switch Setting and Reboot Reset switch to default configuration. Click Default to reset all configurations to the default value. Factory Default interface When you see the information as below, close the web window and launch again after a while. Reboot in progress AirLive Ether-FSH2422W User's Manual 14 4-5 Port Management Port Management includes Port Configuration, Port Mirroring, Bandwidth Control, and Broadcast Storm Control. 4-5-1 Port Configuration In Port Configuration, you can set and view the operation mode for each port. Being set as `Enable', the Speed, Duplex mode, Pause, Backpressure, TX Capability and Address Learning are negotiated automatically. When you set it as `Disable', you have to assign those items manually. Speed: When the Auto-Negotiation column is set as Disable, users have to set the connection speed to the ports ticked. Duplex: When the Auto-Negotiation column is set as Disable, users have to set the connection mode in Half/Full to the ports ticked. Pause: Flow Control for connection at speed of 10/100Mbps in Full-duplex mode. [. . . ] Having located the target firmware file, please click the Update button to start updating firmware. AirLive Ether-FSH2422W User's Manual 38 Updating Firmware to the flash interface After a while, the message shows as below to indicate the user that the update process is complete. Update Complete message on web As for TFTP firmware update, users can get into the command prompt window to proceed. The command prompt window can be opened by entering "cmd" (without quotes) into Start-Run or through Start-All Programs-Accessories. A black and white window (the colors can be changed) containing the command prompt will open. Type in "tftp -i 192. 168. 10. 1 put xxx. bin" (xxx means the file name of the firmware) and press enter to update. 39 Command Prompt Window Note The system will erase the flash at first and then update the new firmware during the update process. [. . . ]