User manual AIRLIVE SNMP-FSH2602MG

[. . . ] SNMP-FSH2602MG 26+2-port SNMP/Web Management Switch User's Manual AirLive SNMP-FSH2602MG User's Manual 1 Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 26+2-port SNMP/Web Management Switch SNMP-FSH2602MG is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Limits and methods of measurement of radio disturbance characteristics of information technology equipment Disturbances in supply systems caused by household appliances and similar electrical equipment "Harmonics" Disturbances in supply systems caused by household appliances and similar electrical equipment "Voltage fluctuations" Information Technology equipment-Immunity characteristics-Limits And methods of measurement 55022:1998/A1 :2000/A2:2003 61000-3-2:2000 EN EN 61000-3-3:1995/ A1:2001 55024:1998/A1 :2001/A2:2003 marking EN CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2005/4/1 SNMP-FSH2602MG CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento SNMPFSH2602MG je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr SNMPFSH2602MGoverholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] 3 State Activity Click on the State Activity will show which ports are working in trunking mode. User can also enable and disable LACP control from here. AirLive SNMP-FSH2602MG User's Manual 33 Figure 4-13 Trunking State Activity Active (select): The port automatically sends LACP protocol packets. N/A (no select): The port does not automatically sends LACP protocol packets, and responds only if it receives LACP protocol packets from the opposite device. Note: A link that has either two active LACP ports or one active port can perform dynamic LACP trunking. A link has two N/A LACP ports will not perform dynamic LACP trunking because both ports are waiting for and LACP protocol packet from the opposite device. If you are active LACP's actor, when you are select trunking port, the active status will be created automatically. Filter Database (Administrator menu) IGMP Snooping The SNMP-FSH2602MG supports multicast IP, one can enable IGMP protocol on web management's switch setting advanced page, then display the IGMP snooping information in this page, you can view difference multicast group, VID and member port in here, IP multicast addresses range from 224. 0. 0. 0 through 239. 255. 255. 255. AirLive SNMP-FSH2602MG User's Manual 34 Figure 4-14 IGMP Snooping The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts that support IGMP. Enabling IGMP allows the ports to detect IGMP queries and report packets and manage IP multicast traffic through the switch. IGMP have three fundamental types of message as follows: Message Query Description A message sent from the queries (IGMP router or switch) asking for a response from each host belonging multicast group. A message sent by a host to the queries to indicate that the host wants to be or is a member of a given group indicated in the report message. A message sent by a host to the queries to indicate that the host has quit being a member of a specific multicast group. Table 4-1 IGMP Snooping Messages Report Leave Group Static MAC Address When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or powered-off device is active on the network again. AirLive SNMP-FSH2602MG User's Manual 35 Figure 4-15 Static MAC address At the main menu, click administrator Filter Database Static MAC Address. In the MAC address box, enter the MAC address to and from which the port should permanently forward traffic, regardless of the device's network activity. In the Port Number box, enter a port number. If tag-based (IEEE 802. 1Q) VLANs are set up on the switch, static addresses are associated with individual VLANs. Type the VID (tag-based VLANs) to associate with the MAC address. Click the Add. MAC filtering MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. AirLive SNMP-FSH2602MG User's Manual 36 Figure 4-16 MAC filtering In the MAC Address box, enter the MAC address that wants to filter. If tag-based (802. 1Q) VLAN are set up on the switch, in the VLAN ID box, type the VID to associate with the MAC address. Choose the MAC address that you want to delete and then click the Delete. VLAN configuration (Administrator menu) A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so only members of the VLAN receive traffic from the same VLAN members. [. . . ] By reference to the picture of typical network connection of "Single IP ­ Stacking mode", user can connect these stacking switches with Giga port in serial sequence. A connection check by pinging these switches' IP will help to avoid network failure. Make sure the master switch is set to "Stacking Master" and slaves to "Stacking Slave". In the Main Menu in "Administrator/IP & Management Mode", user has to set the management mode to "Stacking Master" and slave switches to "Stacking Slave". [. . . ]