User manual AIRLIVE TRAVELER3GM

[. . . ] Table of Contents Traveler3G M 11n 3G Mobile Router with Build-in Sim Card Slot User's Manual Copyright & Disclaimer IMPORTANT USAGE INSTRUCTION For the convenience of use, this product accepts power from a desktop or a laptop computer. Its mandatory to connect both of two USB connectors at one end of USB supplied power cable to computer at one time. Power supply is not sufficient for the device to operate normally if only one USB connector is inserted into the computer. In this scenario it might cause temporary malfunction on the computer. Traveler3G M Users Manual Copyright & Disclaimer Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. [. . . ] Disable all security settings such as WEP, and MAC Address Control. Turn off the WiFi Mobi-HSPA Router and the client, then restart it and then turn on the client again. Ensure that the LEDs are indicating normally. If no, make sure that the AC power and Ethernet cables are firmly connected. Ensure that the IP Address, subnet mask, Router and DNS settings are correctly entered for the network. If you are using other wireless device, home security systems or ceiling fans, lights in your home, your wireless connection may degrade dramatically. Keep your product away from electrical devices that generate RF noise such as microwaves, monitors, electric motors. . . What can I do if my wireless client cannot access the Internet?Out of range: Put the router closer to your client. Wrong SSID or Encryption Key: Check the SSID or Encryption setting. III. Connect with wrong AP: Ensure that the client is connected with the correct Access Point. Right-click on the Local Area Connection icon in the taskbar. Select View Available Wireless Networks in Wireless Configure. Ensure you have selected the correct available network. Reset the WiFi Mobi-HSPA Router to default setting C. Why does my wireless connection keep dropping?Try different antenna orientations for the WiFi Mobi-HSPA Router. Try to keep the antenna at least 6 inches away from the wall or other objects. Try changing the channel on the WiFi Mobi-HSPA Router, and your Access Point and Wireless adapter to a different channel to avoid interference. Traveler3G M Users Manual 4. Keep your product away from electrical devices that generate RF noise, like microwaves, monitors, electric motors, etc. 4 1. 2. What to do if I forgot my encryption key?Go back to advanced setting to set up your Encryption key again. [. . . ] The used of channel binding might be prohibited in EU countries. TX Output Power Transmit Output Power. The TX output power means the transmission output power of the radio. Normally, the TX output power level limit for 2. 4GHz 11g/b is 20dBm at the antenna end. The output power limit for 5GHz 802. 11a is 30dBm at the antenna end. UDP (User Datagram Protocol) A layer-4 network protocol for transmitting data which does not require acknowledgement from the recipient of the data. Upgrade To replace existing software or firmware with a newer version. Traveler3G M Users Manual 7. [. . . ]