User manual AIRLIVE WHA-5500CPE

[. . . ] WHA-5500CPE 802. 11a Multi-Function Outdoor CPE User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 802. 11a Multi-function Outdoor AP AirLive WHA-5500CPE is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Broadband Radio Access Network(BRAN); 5GHz high performance RLAN; Harmonized EN Covering essential requirements of Article 3. 2 of the R&TTE Directive. Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public Safety for information technology equipment including electrical business equipment 301 893 v1. 3. 1 (2005-03) 300 328 v1. 7. 1 (2006-10) EN EN 301 489-1 v1. 6. 1 (2005-09) EN 301 489-17 v1. 2. 1 (2002-08) EN 50371:2002 EN 60950-1:2001 CE marking Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2007/10/4 AirLive WHA-5500CPE CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WHA-5500CPE je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. [. . . ] You can select Both to allow TKIP clients and CCMP clients to connect to the Access Point at the same time. Group Rekey Interval: A group key is used for multicast/broadcast data, and the re-key interval is time period that the system will change the group key periodically. The shorter the interval is, the better the security is. The default is 300 sec. 3. 1. 4 FINISH SETUP WIZARD AND SAVE YOUR SETTINGS After stepping through the Wizard's pages, you can click the APPLY button for your modification to take effect. This also makes your new settings saved into the permanent memory on your system. You are now ready to use the WHA-5500CPE. If you change the device's IP address, as soon as you click on FINISH you will no longer be able to communicate with your WHA-5500CPE. You need to change your IP address and then re-boot your computer in order to resume the communication. 23 AirLive WHA-5500CPE User's Manual 3. Basic Configuration 3. 2 Advanced settings The advanced settings tab on the top row of the window allows you to perform modifications that normally you may not need to do for general operations except changing your password from the default factory setting (this is highly recommended for security purposes). 3. 2. 1 PASSWORD SETTINGS Advanced Settings>> Password Settings The default factory password is "password". To change the password, press the Password Settings button to enter the Password Settings screen; then enter the Current Password followed by the New Password twice. The entered characters will appear as asterisks. 24 AirLive WHA-5500CPE User's Manual 3. Basic Configuration 3. 2. 2 SYSTEM MANAGEMENT Advanced Settings>> System Management Clicking the System Management button to configure system related parameters to for the WHA-5500CPE. HTTP Port No. : HTTP stands for Hyper Text Transfer Protocol. The default port for the HTTP Web server is 80. Time-out: This setting specifies the duration of idle time (inactivity) before a web browser or telnet management session times out. UPnP: The Universal Plug and Play (UPnP) feature allows a Windows XP/ME PC to discover this WHA-5500CPE and automatically show an icon on the screen. Then a user can double-click the icon to access this device directly (without having to find out its IP address). Syslog: Syslog is an IETF (Internet Engineering Task Force - the Internet standards body)-conformant standard for logging system events (RFC-3164). When the WHA-5500CPE encounters an error or warning condition (e. g. , a log-in attempt with an invalid password), it will create a log in the system log table. To be able to remotely view such system log events, you need to check the Enable Syslog box and configure the IP address of a Syslog daemon. When doing so, the WHA-5500CPE will send logged events over network to the daemon for future reviewing. Syslog server IP address: System event messages generated by the wireless access point will be sent to a Syslog daemon running on a server identified by this IP address. 25 AirLive WHA-5500CPE User's Manual 3. Basic Configuration 3. 2. 3 SNMP Settings Advanced Settings>>SNMP Settings This screen allows you to configure SNMP parameters including the system name, the location and contact information. System Name: A name that you assign to your 802. 11a+g Router. [. . . ] It provides real-time signal strength between two nodes. Better signal strength means better alignment results, which aims to improve link quality. Click the "SIGNAL SURVEY" button. A pop-up window will continuously display signal strength in real time. [. . . ]