User manual AIRLIVE WL-2000CAM

[. . . ] WL-2000CAM IR Wireless-G Dual Stream IP Camera User's Manual AirLive WL-2000CAM User's Manual 0 Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product IR Wireless G Dual Stream IP Camera AirLive WL-2000CAM is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 301 489-1 EN 301 489-17 EN 300 328 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment And services; Part 17Specific conditions for Wideband data and HIPERLAN equipment Electromagnetic compatibility and Radio spectrum matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1: technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public Safety for information technology equipment including electrical business equipment EN 50371 EN 60950-1 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/04/08 AirLive WL-2000CAM CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WL-2000CAM je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. Country lt Lietuvi [Lithuanian] Declaration Siuo OvisLink Corp. [. . . ] MPEG4 RTSP port: Enter the MPEG4 RTSP port, default value is 8050 for computer view, 8030 for mobile view. AirLive WL-2000CAM User's Manual 21 6-1-3-5 IP Notification When network notify type is set to On, you can send an e-mail notification of the completion of the network setting. Notify typeSelect type of DHCP, Static IP and PPPoE will notify. SMTP server nameType the SMTP server name up to 64 characters, or the IP address of the SMTP server. AuthenticationSelect the authentication required when you send an email. Off: Select if no authentication is necessary when an email is sent. On: When authentication is necessary an e-mail is sent, select one of the authentication methods from the followings. SMTP: Select if SMTP authentication is necessary when an e-mail is sent. POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is sent. Note · When you set to On, be sure to select either or both SMTP or/and POP before SMTP. POP server nameIt is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. User name, PasswordType the user name and Password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. Recipient e-mail addressType the recipient e-mail address up to 64 characters. You can specify up to three recipient e-mail addresses. Administrator e-mail addressType the Administrator e-mail address up to 64 characters. This address is used for reply mail and sending system messages from the SMTP server. SubjectType the subject/title of the e-mail up to 64 characters. With respect to mail which is sent according to the IP notification. Message Type the text of the e-mail up to 384 characters. Default value provides network information including IP, Port, MAC, Model, Firmware Version and Web Version. AirLive WL-2000CAM User's Manual 22 6-1-3-6 Wireless Wireless settings must be the same as the access point or ad hoc device. [. . . ] There are three Motion Detection functions as sensors to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection function can support to FTP, SMTP and Alarm output for capturing and sending images or starting alarm output. Click it On when you use the Motion Detection function and detecting zone appears for adjusting and moving. The common setting options are displayed below. [. . . ]