User manual AIRLIVE WL-5460AP V2 DATASHEET

[. . . ] WL-5460AP v2 802. 11g Multi-function Wireless Access Point he AirLive WL-5460AP is the successor to the OvisLink's popular WL-1120AP Wireless Access Point with outstanding features at an very competitive price. [. . . ] WDS Repeater: To increase the wireless coverage of a WDS enabled AP/Router Universal Repeater: AirLive's unique universal repeater function let the WL-5460AP extend the coverage of your AP/Router, even if your AP/Router doesn't have WDS function!WISP Mode: The WISP mode is similar to Client Mode. IP sharing function is added so you can share the WISP connection with many PCs. WISP+Universal Repeater: The WISP+Universal Repeater mode let you share WISP connection on both wireless and wired side. Wireless Client Isolation The WL-5460APv2 features the new Wireless Client Isolation function previous available only in more expensive APs. When you enable this function, the wireless clients will not be able to see each other. Therefore, it is an important function for office and Hotspot operator to protect the security between different wireless users. 5F, No. 96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan ACK Timeout and TX Power Regulation The WL-5460APv2 features ACK timeout function to let you adjust the timeout value for long distance operation. In addition, 5-level TX power adjustment let you match different antennas for law compliance. The ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier. Extended Security Features The WL-5460APv2 support WEP, WPA and WPA2 security functions. [. . . ] - TX power regulation in 4 levels - Watchdog function use PING - Wireless Client Isolation (e8 firmware) - ACK Timeout Adjustment - DHCP Relay function - 802. 11g Protection - Europe (ETSI) 13 Channels : 2. 412GHz~2. 472GHz Modulation Technique: - 11g Orthogonal Frequency Division Multiplexing (64QAM, 16QAM, QPSK, BPSK) - 11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) - Data Rate: 54, 48, 36, 24, 18, 11, 5. 5, 2, 1 Mbps Output Power: - 18dBm - Adjustable in 4 levels Specifications Hardware: - 2x 10/100Mbps LAN Port - 2MB Flash, 16MB SDRAM - Reversed SMA Antenna Port - Power, LAN, WLAN LED indicators WISP Mode - DHCP, PPTP, L2TP, PPPoE ISP Authentication Support - Wireless Client function as WAN - WISP mode is not the same router mode - To configure the WISP mode, you PC must be connected to the LAN port Antenna : - 2 dBi detachable Dipole Antenna - Reversed SMA Connector Security: - 64/128-bit - 802. 1x Radius Support - WPA/WPA2-PSK support - WPA Enterprise support in AP/WDS mode Frequency Range: - USA (FCC) 11 Channels: 2. 412GHz~2. 462GHz 5F, No. 96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan Configuration: - Web Management - WDS (Bridge, Client, Repeater) mode - Hide ESSID - 802. 1x - MAC Access Control - MAC Access Table - Wireless Client Isolation (e8 firmware) - SSID, Channel, RTS Threshold, Frag Threshold Power Supply - DC12V Dimension and Weight - 135 x 100 x 26mm - 180 g EMI - FCC, CE Environmental - Operating temperature: 0~60 - Operating humidity (non-condensing): 20~80% - Storage temperature: -20~65 - Storage humidity: 95% Max Ordering Information: AirLive WL-5460AP v2 802. 11g Wireless Access Point 5F, No. 96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan [. . . ]