User manual AIRLIVE WP-201G V2

[. . . ] WP-201G v2 802. 11g Wireless USB Print Server User's Manual AirLive WP-201G v2 User's Manual 0 Declaration of Conformity OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product We, Manufacturer/Importer 802. 11g Wireless USB2. 0 Print Server AirLive WP-201G v2 is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 7. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2006-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50371:2002 Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public business equipment EN 301 489-1 V1. 6. 1 EN 60950-1:2001+A11 Safety for information technology equipment including electrical :2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/5/5 AirLive WP-201G v2 CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WP-201G v2 je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. Country lt Lietuvi [Lithuanian] Declaration Siuo OvisLink Corp. [. . . ] The ha tag must be preceded by the ht tag. The ip= tag should correspond to the IP address you want to assign to the print server. For example, a print server with the following configuration: Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203. 66. 191. 12 AirLive WP-201G v2 User's Manual 34 The entry for this print server in the /etc/bootptab file should be: PS010101:\ :ht=1:\ :ha=0000B4010101:\ :ip=203. 66. 191. 12: 6. 4 Verify Print Server's IP Address To verify that your print server is responding to the newly assigned IP address using a PING command: ping ip-address 6. 5 Configure Remote LPD Printing on the Host The procedure you use to configure your UNIX host(s) to allow printing to your network remote print server varies between different varieties of UNIX. The procedures below can be used for UNIX variants that are related to BSD UNIX, such as SunOS or Linux. For other versions of UNIX, consult your system documentation, keeping in mind that: 1. The print server should be treated as a BSD networked print server host. The host name should be the name (or IP address) that you have assigned to the print server. The printer name (or queue name) on the remote host should be p1, p2, or p3, the name of the printer port on the print server. You will need to perform the tasks below, logged in as the superuser (root) to configure your UNIX host for printing. Optionally, assign a name corresponding to the print server's IP address. You can add this address to the /etc/hosts file, by adding a line such as: 203. 66. 191. 186 pserver 2. Create a spool directory for the printer in the same directory where spool directories are normally kept on the machine, such as /var/spool or /var/spool/lpd: mkdir /var/spool/lpd/pserverd chown daemon /var/spool/lpd/pserverd chgrp daemon /var/spool/lpd/pserverd chmod 775 / var/spool/lpd/pserverd AirLive WP-201G v2 User's Manual 35 3. Add an entry to the host's /etc/printcap file, similar to the following: printer-name:\ :lp=:\ :rm=203. 66. 191. 186:\ :rp=p1:\ :If=/var/spool/lpd/pserverd/log:\ :sd=var/spool/lpd/pserverd:\ :mx#0: Lines should be indented with tabs. More than one printer name can be used, with variants separated by vertical bars (name1|name2). The rm=entry should correspond to the IP address you have assigned to the print server. You can also use a host name if you have assigned one in the /etc/hosts file. The sd= entry should correspond to the port name of the remote printer. The values should be one of p1, p2 or p3 depending on the printer port. The print server should now be available for printing from your UNIX host. AirLive WP-201G v2 User's Manual 36 Chapter 7: Configuration Utility 7. 1 Introduction This chapter introduces print server's system configuration utility in the Windows environment. This utility is automatically installed during Windows Administrator Utility installation procedure ­ refer to Section 3. 2 and 3. 3. This utility provides the most complete management and configuration functions on the print server side. This utility only provides configuration functions for the print server itself; it does not include configuration functions for client side or other file server or NetWare server in the network environment. [. . . ] The URL format is http://IP:631/Port Name. The IP should be the print server's IP. The number 631 is IPP standard port number. Port Name is the port name of print server that your printer is connected to. [. . . ]