User manual AIRWELL RC4 900087

[. . . ] By selecting the HEATING mode, the air flap will move automatically to vertical air delivery position, optimal for heating. The fan will be turned off when the indoor coil temperature is not sufficiently hot to prevent uncomfortable cold air drafts. In some models the HOT KEEP function is operating in AUTO FAN mode only. [. . . ] SLEEP FUNCTION Press the SLEEP button (6) to select the SLEEP function. The sleep icon light while the sleep OFF time icon and the time which is 7 hours after current time blink as default. The default setting can be changed from 3 hr. by pressing up and down buttons HOUR+(11) and HOUR-(12) respectively. (The sleep timer will display the default time or the setting time plus the current time initially in the display). For example: current time is 23:00 and the sleep mode is set, the sleep mode OFF time will be 6:00. If the sleep off time is set to 10 hr, the sleep mode OFF time will be 9:00. All other timers will temporarily be suspended during the activation of the sleep timer. The other timers will resume operation at the end of the SLEEP time. To cancel the SLEEP function press one of the following: START/STOP button (1) SLEEP button (6) NOTE: In some models the SLEEP icon lights only and the OFF time is set for seven hours as default. 3 TIMER OPERATION There are four timers that can be selected on the remote control. Two daily timers (designated as T1, T2), and two optional weekend timers (designated as WKTI, WKT2). Each timer can be selected by pressing TIMER button (11). To set each timer use time adjust up and down buttons Hour+(18) and Hour-(19) respectively. SET button (10) to enable the timer and/or CLEAR button (12) to disable the timer. Indicator (E)on the air conditioner will light up during timer operation. NOTE: After a power, failure the timer operation is cancelled, timer indicator (E)on the air conditioner will blink, the unit will be automatically turned to stand-by mode and indicator (A) lights. To resume the timer operation, follow the instructions below. A. DAILY TIMER The daily timers T1 and T2 can be set for ON and OFF separately for two different time periods. Once the timer is set it will resume operation when initiated. B. WEEKEND TIMER (OPTIONAL) The weekend timers WKT1 and WKT2 can be set for ON and OFF separately for two different time periods for two days only. [. . . ] Press CLEAR button. 1 The selected timer icon blinks & the corre spending previous time ON, OFF settings light. All settings of the selected timer are cleared. NOTES: 1. The default settings for the timers are 7:00 and 18:00, for ON and OFF respectively. 2. The timer mode will always display the last ON and OFF settings on the LCD display. 3. Pressing CLEAR button (12) for 5 seconds will cancel all timer settings and clear timer display. 7 AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT Press button (7) to activate the supply air flap to auto swing; Press button (8) to activate the Horizontal Air Flow to auto swing. [. . . ]