User manual AIWA AM-F65

[. . . ] OWNER'S RECORD For your convenience, record the model number and serial number (you will find it in the disc holder) in the space provided below. Please refer tothem when you contact your Aiwa dealer in case of difficulty. Following accessories are supplied this unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Parl 15 of the FCC Rules. [. . . ] This unit has three functions for registering the index marks. During digital recording from a CD or MD+~ The index mark information recorded on the CD or MD is copied as it is. @)CD or MD @ Recording (MD) @ Index marks During analog recording microphone recording + If there is an unrecorded longer than 3 seconds, an be registered automatically is input next time. @) Input sound @ Recording (MD) @ While there is no sound @ Index marks or You can register an index mark by pressing ~ during recording even if the Marker function is set to OFF. This function is activated when the Auto marker or Time marker function is set. note The index mark may not be registered correctly even if the Auto marker function is set. Q You cannot register index marks without registering the track number. S You cannot register anyindexmark ona disc with 254 tracks already recorded. @Auto marker function @Time marker function @ Marker function off 3 Press El I to start recording, Note Selected marker function is retained after the power is turned off. The available time printed on the disc can be doubled when the sound is recorded in monaural. Display "MONO in step 1 and display "STEREO in step 2. Note c Every time you change the recording mode, the track number advances by one. Q Selected recording mode is retained after the power is turned off. Q While recording a stereo sound source in monaural, thesoundfrom the headphones will be heard in stereo. Q A disc recorded in monaural cannot be played back on another MD player which cannot play backa monaural recorded disc. Recording pauses when there is no sound, and resumes automatically when the sound begins again. When recording a meeting , it will only record when someone is speaking and saves the disc space. The recording pauses when the sound source isbelow a certain level for4 seconds and resumes when the sound begins. You can restart recording by pressing -11 while in recording pause mode. During digital recording from an Aiwa mini component, the recording is always synchronized with the operation of the connected unit. Recording starts automatically when the connected unit starts playback. Recording pauses when the connected unit pauses or stops, and resumes when the connected unit restarts playback. [. . . ] There are also quick and easy functions for random playback, in which the order of the tracks can be rearranged randomly, and for renumbering tracks to play them in any order. Therefore, the MD system is subject to the following restrictions. is displayed even if the recordeng time does not reach the maximum recordable time of the disc (60-minute or 74-minute). "DISC FULL" is displayed when 254 tracks are already recorded on a disc, without respect to the recording time. [. . . ]